Gigabyte GA-P35-DS3L Thread

[Retrospekt]

E1200 at 3.0ghz. 1.5v vcore, 375fsb, 8x multiplier. 24.00s superpi.

Any advice on getting this cpu higher? I have tried upping dram voltage to +.2, mch to +.3, and fsb to +.3. Nothing did it.

[DeRock131]

Originally Posted by Retrospekt

E1200 at 3.0ghz. 1.5v vcore, 375fsb, 8x multiplier. 24.00s superpi.

Any advice on getting this cpu higher? I have tried upping dram voltage to +.2, mch to +.3, and fsb to +.3. Nothing did it.

From what ive read the the e1200 top out right there. Only a very few people can break 3.0 for some reason. Plus your at you max vcore that you should be using for 24/7 usage. Sorry.

[Retrospekt]

Originally Posted by DeRock131

From what ive read the the e1200 top out right there. Only a very few people can break 3.0 for some reason. Plus your at you max vcore that you should be using for 24/7 usage. Sorry.

Oh well, 24s SuperPi and 3.0ghz is about all someone can ask for from a 50 dollar chip.

Still very impressed.

[Mercyflush64]

Originally Posted by technogeek

It may be a long shot but have you set your "initial display first" up in the Advanced BIOS Features tab?

Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card.
PCI Sets the PCI graphics card as the first display. (Default)
PEG Sets the PCI Express graphics card as the first display

Just a thought

Thanks for trying the approach but yeah, I made sure that was set to PEG.

[smokinbonz]

Originally Posted by Mercyflush64

Do you have SP1 installed? Just wondering if that could be the cause of my issues as well. My problems started after I installed it.

Negative I have SP2, just so i dont give the wrong impression after the crash usually the device will work whether its an ipod or digital camera. I just wanted to make it clear that it works, just sometimes it crashes the system.

[mcj3671]

Some how my girl friend killed my computer this morning lol So I got a new Q6600 and oveclocked it to 3.6GHz right off. I wasnt sure it would be stable but I had the volt mod all ready in place from my last Q6600 so I just checked it and took off.
Turns out I got a lower VID this time. 1.3000V Well its not a 1.2V but I figured
ill give it a shot. Booted just fine and ran OCCT for 1 hour full load. Here are the results.
I may try for more but I think this is as far as i need to go with it.
Q6600 2.4GHz @ 3.6GHz 400X9
Tuniq Tower 120
Gigabyte GA-P35-DS3L
OCZ DDR2 6400 800MHz 4-4-4-12
http://i307.photobucket.com/albums/n...j3671/test.jpg
http://i307.photobucket.com/albums/n...h28-Volt12.png
http://i307.photobucket.com/albums/n...1h28-Volt5.png
http://i307.photobucket.com/albums/n...1h28-Volt3.png
http://i307.photobucket.com/albums/n...1h28-VCore.png
http://i307.photobucket.com/albums/n...21h28-CPU4.png
http://i307.photobucket.com/albums/n...21h28-CPU3.png
http://i307.photobucket.com/albums/n...21h28-CPU2.png
http://i307.photobucket.com/albums/n...21h28-CPU1.png

[wiggy2k7]

Originally Posted by mcj3671

Some how my girl friend killed my computer this morning lol So I got a new Q6600 and oveclocked it to 3.6GHz right off. I wasnt sure it would be stable but I had the volt mod all ready in place from my last Q6600 so I just checked it and took off.
Turns out I got a lower VID this time. 1.3000V Well its not a 1.2V but I figured
ill give it a shot. Booted just fine and ran OCCT for 1 hour full load. Here are the results.
I may try for more but I think this is as far as i need to go with it.
Q6600 2.4GHz @ 3.6GHz 400X9
Tuniq Tower 120
Gigabyte GA-P35-DS3L
OCZ DDR2 6400 800MHz 4-4-4-12
http://i307.photobucket.com/albums/n...j3671/test.jpg
http://i307.photobucket.com/albums/n...h28-Volt12.png
http://i307.photobucket.com/albums/n...1h28-Volt5.png
http://i307.photobucket.com/albums/n...1h28-Volt3.png
http://i307.photobucket.com/albums/n...1h28-VCore.png
http://i307.photobucket.com/albums/n...21h28-CPU4.png
http://i307.photobucket.com/albums/n...21h28-CPU3.png
http://i307.photobucket.com/albums/n...21h28-CPU2.png
http://i307.photobucket.com/albums/n...21h28-CPU1.png

Temps are a bit hight... 72 degrees C

[mcj3671]

Originally Posted by wiggy2k7

Temps are a bit hight... 72 degrees C

Sure they are high. I was running a torture test to see if it was stable and it was. 72 degrees is not very bad when you consider all 4 cores are maxxed out and its a 50% oc. The computer will never be maxxed out like that in every day use. My normal idle temp is 32C and load is 54c so as you can see it stays well within normal temps during every day use. Im sure i can lower the Vcore but i dont really have the time any more to give to the hole thing. It takes me an hour every time i change a setting. I just cant see heating this thing up like that for too many hours just to get the temp down during testing as it will never see a temp like that in normal usage.

[ZDarryl]

Have any of you "VETERANS" of this board filled out my BIOS spreadsheet with your current settings?

We would all love to see it.

Also, do any of you know if the difference BIOS revisions have difference BIOS options?

Thanks!

.
I really need to increase my OC, 3.113 (415x7.5) seems wimpy for my Q9300....
I really need to increase my OC of my 8800GTS (16% Oc of core and 3% OC of memory seems wimpy)

[mugan23]

has anybodies ds3l maxed out at 450fsb?