Gigabyte GA-P35-DS3L Thread

[Mikecdm]

Originally Posted by phalcom

hello All,

I have this motherboard with CPU E5200 and OC 4.0GHz, but is not stable in ortos, is necessary more voltage on FSB/MHC too? what is the high secure voltage for my CPU? here my settings:

- E5200@4.0GHz (320x12.5)
- CPU voltage 4.5v
- Corsair DDR2-800 (5-5-5-18)

P.D: sorry for my english.

Saludos,

Hi, if you meant that your vcore is at 1.45v, that is a little high. Intel recommended max is 1.36v. At 320fsb, you really don't need to be adding much fsb/mch voltage but you can try. I was able to run my E5200 at 346fsb with those settings at stock voltage.

What is the memory divider that you are using?

[phalcom]

thanks for you help Mike, Now post the settings in picture . How you have config the 5200 at 346fsb?

[paulerxx]

e8400 @ 4.2GHz. 467Mhz x 9.0 @ 1.34v. .2v drop.

[ZDarryl]

Hey Guys,

I just bought a Gigabyte GA-EP45-UD3P to replace my P35-DS3L board and was wondering if the bios setting are pretty much the same?

It looks like a lot of guys here now have the EP45-UD3P board, so I hope you can help me out.

I haven't installed it yet, still cleaning up and organizing all of my files before reformatting.

Thanks!

In my sig is a spreadsheet I created for the P35-DS3L bios settings. Please compare this to the EP45-UD3P's bios.

[SgtSpike]

Originally Posted by phalcom

hello All,

I have this motherboard with CPU E5200 and OC 4.0GHz, but is not stable in ortos, is necessary more voltage on FSB/MHC too? what is the high secure voltage for my CPU? here my settings:

- E5200@4.0GHz (320x12.5)
- CPU voltage 4.5v
- Corsair DDR2-800 (5-5-5-18)

P.D: sorry for my english.

Saludos,

Originally Posted by ZDarryl

Hey Guys,

I just bought a Gigabyte GA-EP45-UD3P to replace my P35-DS3L board and was wondering if the bios setting are pretty much the same?

It looks like a lot of guys here now have the EP45-UD3P board, so I hope you can help me out.

I haven't installed it yet, still cleaning up and organizing all of my files before reformatting.

Thanks!

In my sig is a spreadsheet I created for the P35-DS3L bios settings. Please compare this to the EP45-UD3P's bios.

It'll have all the same options, possibly more, but I imagine the layout will be quite different. Shouldn't be too hard to figure out though since you're good and familiar with the 775-related BIOS's.

[ZDarryl]

Originally Posted by SgtSpike

It'll have all the same options, possibly more, but I imagine the layout will be quite different. Shouldn't be too hard to figure out though since you're good and familiar with the 775-related BIOS's.

Hey SgtSpike,

Would you mind filling out my spreadsheet with your bios settings? It would be great to make sure I don't overlook anything.

I would really appreciate it!!!

Thanks!

Darryl

[SgtSpike]

Originally Posted by ZDarryl

Hey SgtSpike,

Would you mind filling out my spreadsheet with your bios settings? It would be great to make sure I don't overlook anything.

I would really appreciate it!!!

Thanks!

Darryl

Sure I can when I get home.

[ZDarryl]

Awesome!!! THANKS!!!!!!!!!!

[tonee]

I recently got my DS3L and Dark Knight and installed them both yesterday. Today I was just seeing what my CPU could reach (e6300) and I tried to get it to 3.0ghz @ 1.5v and that didn't work so i tried to bring it back down to 2.8ghz because that was what I had it overclocked at before I attempted to overclock to 3.0ghz. Now the problem is that when I try to put the settings back to 2.8ghz and 1.4v, the computer just turns on and off 3 times and when it boots back up I go into bios and it says cpu control is disabled ( forgot the exact name ) Could you please help me! I'm currently just running my cpu at stock.

Thanks
Tony

[Arrowslinger]

Since I cant seem to see it what are the major differences in the EP 45T-DS3R and the P35-DS3L?