Gigabyte GA-P35-DS3L Thread

[Hueristic]

Originally Posted by richardbb85

will the ep35-ds3l work with the gts 250 graphic card?

http://www.microcenter.com/single_pr...uct_id=0307723

YES. why would you think it wouldn't?

[MintMouse]

Might have saw the PCIe 2.0 on Graphics card and thought it was different from PCIe if he's coming from 3870.

[richardbb85]

Originally Posted by MintMouse

Might have saw the PCIe 2.0 on Graphics card and thought it was different from PCIe if he's coming from 3870.

hahha, exactly


thanks guys

[SgtSpike]

Originally Posted by Hueristic

Not yet just running a burn in tonight. I'll check it tomorrow, I only have a 250w hooked up to it so I didn't want to throw a pci-e on there.

OK, think I found the issue. Looks like PCI bus (only the 3 external ones) is bad.

no worries though I was only going to run a pci raid card and external sound on them but I can work around that.

BTW I bought this off of fleabay so no reciept. Does Gigabyte RMA on serial number or reciept?

IIRC, they RMA based on serial number, with something like a three year warranty. But I could be wrong...

[richardbb85]

have volt at 1.47 already, but still cant get stable at 3.4

da heck

should i add more? when should i stop?

[Hueristic]

Originally Posted by SgtSpike

IIRC, they RMA based on serial number, with something like a three year warranty. But I could be wrong...

That would be nice, I'll have to look into it. But It's being stretched right now.
[IMG][/IMG]
[IMG][/IMG]

[SgtSpike]

Lol, Hueristic, what the crap are you doing to your mobo??

[Hueristic]

Originally Posted by SgtSpike

Lol, Hueristic, what the crap are you doing to your mobo??

When it's done It'll make sense!

[hclarkjr]

just wanted to thank you SgtSpike for this thread. i messed around all weekend with my board using some of the tips in this thread with the main one i found most usefull being to run the memory at 1 to 1 ratio. i was always told that did not matter that much with intel chips as it does for AMD chips of which i used most of my life. this is only my third Intel chip i have ever owned with the rest being AMD. i got my Q6600 to post at 400x8 and run some benchmarks but it was not stable enough with VID of 1.30 in bios and 1.26 via CPU-Z. I then tried 356x9 with the same VID and 1 to 1 ratio for memory speed of 712 and am running perfectly fine with the benchmarks being close to the 400x8 setup. to SgtSpike!!

[Hueristic]

Originally Posted by hclarkjr

just wanted to thank you SgtSpike for this thread. i messed around all weekend with my board using some of the tips in this thread with the main one i found most usefull being to run the memory at 1 to 1 ratio. i was always told that did not matter that much with intel chips as it does for AMD chips of which i used most of my life. this is only my third Intel chip i have ever owned with the rest being AMD. i got my Q6600 to post at 400x8 and run some benchmarks but it was not stable enough with VID of 1.30 in bios and 1.26 via CPU-Z. I then tried 356x9 with the same VID and 1 to 1 ratio for memory speed of 712 and am running perfectly fine with the benchmarks being close to the 400x8 setup. to SgtSpike!!

Sounds like you may have a vdroop issue though.

BUT Nice Job!