|
![]() |
Overclock.net - Overclocking.net > Intel > Intel Motherboards | |
The GIGABYTE-GA-P35/C-DS3R Thread
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||||
|
4.0 GHz
|
GIGABYTE-GA-P35/C-DS3R
GIGABYTE-GA-P35-DS3R ![]() Quote:
Rev 2.0 Rev 1.0 Newegg BIOS/DRIVERS Latest Official BIOS - F12f (2008/03/27) Rev 2.1 Rev 2.0 Rev 1.0 Intel P35 Chipset Drivers REALTEK HD Audio Drivers Rev 2.1 Drivers Rev 2.0 Drivers Rev 1.0 Drivers MODS Voltage Mods VDROOP Mod seems to not work and actually reduces voltages as confirmed by me and others. VDROOP Mod - Connect the 2 pins of the resistor using solder or silver conductor - Results Confirmed Working By: nytevizion USER IMPRESSIONS/FAQS USER RESULTS GIGABYTE-GA-P35C-DS3R *DDR3 Support* ![]() Quote:
Rev 2.0 Rev 1.x Newegg BIOS/DRIVERS Latest Official BIOS - F11e (2008/03/27) Rev 2.1 Rev 2.0 Rev 1.x Intel P35 Chipset Drivers REALTEK HD Audio Drivers Rev 2.1 Drivers Rev 2.0 Drivers Rev 1.x Drivers MODS Vcore/Vdroop Mod via Madshrimps USER IMPRESSIONS/FAQS USER RESULTS
__________________
GIGABYTE-GA-P35/C-DS3R Thread DFI Lanparty LT/UT P35-T2R Thread DFI Lanparty DK P35-T2RS Thread
Last edited by BTK : 05-06-08 at 12:21 AM. |
|||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
New to Overclock.net
|
Thank you, I was looking for this thread since I have the p35c.
__________________First measure on the board, mosfet cooling ![]() Does anyone know of any blocks/heatsinks/waterblocks that will fit on the mosfets/vregs? Also, mcw30 does work on the southbridge with a slight modification.
|
||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
New to Overclock.net
|
Great thread. +rep I might have to try the volt mod. The max FSB I could achieve is 370 any more and I crash right as I get to windows or sooner.
__________________
|
|||||||||||||
|
|
|
|
#4 (permalink) | ||||||||||||
|
New to Overclock.net
|
I think the P35c is a better overclocker than the P35
__________________In comparing someones Q6600 GO to my x3210 b3, my overclocks were higher and prime/orthos stable. He also had to raise the fsb and other voltage to gain stability and mine were left stock. We both have watercooled systems, though I really need to cover the vregs/mosfets because they run super hot I'm overclocked at 440x8 (1.55v) (3520mhz on a 260watt cpu ![]() http://www.xtremesystems.org/forums/...an+black+pearl
Last edited by Eddie3dfx : 12-23-07 at 10:42 AM. |
||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||
|
4.0 GHz
|
It should not be because they are like the same boards. It largely depends on the cpu.
I just ran prime95 small FTT. 1.440 Load and 58C load. 62C one time and it's warm in here. And Orthos same test load is 55C. Tuniq is a beast. ![]() 2.1VDIMM
__________________
GIGABYTE-GA-P35/C-DS3R Thread DFI Lanparty LT/UT P35-T2R Thread DFI Lanparty DK P35-T2RS Thread
|
|||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||
|
4.0 GHz
|
No one wants to try and keep this thread?
__________________
GIGABYTE-GA-P35/C-DS3R Thread DFI Lanparty LT/UT P35-T2R Thread DFI Lanparty DK P35-T2RS Thread
|
|||||||||||
|
|
|
|
|
#7 (permalink) | ||||||||||||
|
Security Sleuth
|
I'm having a huge problem. In the past 10 minutes i discovered that my clock speed is 2.13ghz which is the stock clock on my proc. So i went into bios to change it back to the OC setting. Then it instantly reboots then it's booting then it reboots again before getting to the windows screen then reboots again, THEN get's to the windows screen and after checking CTRL panel and orthos it reverts back to 2.13. What on earth is going on. I CAN NOT LIVE LIFE AT STOCK!!!!!!!!
|
||||||||||||
|
|
|
|
#8 (permalink) | |||||||||||
|
4.0 GHz
|
turn off pc
take out the cmos battery for about 5 minutes and then put it back in and try it
__________________
GIGABYTE-GA-P35/C-DS3R Thread DFI Lanparty LT/UT P35-T2R Thread DFI Lanparty DK P35-T2RS Thread
|
|||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||
|
Security Sleuth
|
I ran into a huge headache. Becasue of the "Bright" engineers at Gigabyte they put the cmos battery right under my gts double wide card. So i had to take it out then remove the battery. In the end the problem still persists. So i tried to isolate the problem. the memory speed and the multiplier could be adjusted without it being reverted back to default . So now i know that my cpu is the one i can't OC. so what can i do now?
|
||||||||||||
|
|
|
|
#10 (permalink) | |||||||||||
|
4.0 GHz
|
did you flash bios or anything beforehand? could be a bad flash and time for RMA
anything you specifically remember doing before this started happeneing
__________________
GIGABYTE-GA-P35/C-DS3R Thread DFI Lanparty LT/UT P35-T2R Thread DFI Lanparty DK P35-T2RS Thread
|
|||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|