DFI Lanparty DK P35-T2RS Thread

[thomasbu]

Originally Posted by Iceman0803

You have to use the "special add" option. Genie BIOS>Voltage Setting>CPU VID special add

Thanks, upped the Vcore. It still wont overclock past 2920MHZ w/ the Vcore set at 1.35. Upping the Vcore past this just wouldnt be worth it. My PSU has 30A on 12V so i should be ok. With the same RAM and CPU I was able to get to 3.7 on the P5B Deluxe. Anything, and i mean anything above my current clock causes a DOS version of Prime 95 to get errors. please Help?

[IcedEarth]

yea, i will give it a miss.

I've got a HUGE project in on Wednesday anyways. If i don't hand that in i don't get my qualifications, which means i will be out of my job

So i think it may be best to tinker with my PC next week, just in case i break something

And the temp paste, i still have my TTBT paste and my brothers Tuniq Paste. But then it would mean disturbing my Fuzion once it is fitted. And that isn't wise because i don't use clamps on the tubing (the nozzles are too close) So i don't really want to remove my Fuzion while there is coolant in the system

[wire]

Originally Posted by IcedEarth

:
And the temp paste, i still have my TTBT paste and my brothers Tuniq Paste. But then it would mean disturbing my Fuzion once it is fitted. And that isn't wise because i don't use clamps on the tubing (the nozzles are too close) So i don't really want to remove my Fuzion while there is coolant in the system

True..

[Iceman0803]

Originally Posted by thomasbu

Thanks, upped the Vcore. It still wont overclock past 2920MHZ w/ the Vcore set at 1.35. Upping the Vcore past this just wouldnt be worth it. My PSU has 30A on 12V so i should be ok. With the same RAM and CPU I was able to get to 3.7 on the P5B Deluxe. Anything, and i mean anything above my current clock causes a DOS version of Prime 95 to get errors. please Help?

What do you mean when you say upping vcore past 1.35v wouldn't be worth it? Are you having probs with heat or someting?

[Bal3Wolf]

Originally Posted by thomasbu

Thanks, upped the Vcore. It still wont overclock past 2920MHZ w/ the Vcore set at 1.35. Upping the Vcore past this just wouldnt be worth it. My PSU has 30A on 12V so i should be ok. With the same RAM and CPU I was able to get to 3.7 on the P5B Deluxe. Anything, and i mean anything above my current clock causes a DOS version of Prime 95 to get errors. please Help?

I needed more vcore on this board then i did on my old ip35-e but my temps havet went up any lower then they were on the old ip35-e. To get 3600 folding stable im using 1.39-1.40 vcore.

[MosIncredible]

My first post from the DK and I'm very excited. The amount of options in the bios is crazy.

[R2D2]

Okay...call me stupid or call me new (which i am) but I can't figure out how to up the vcore in my bios.
I can do the fsb and RAM voltage etc, but i can't figure out which one is vcore and the manual is not helpful.
help please.

[wire]

The one in red is how you increase your cpu voltage.

[MosIncredible]

CPU VID special add. It's weird isn't it? Especially coming from a Gigabyte board. Priming 3.2GHz [400x8] right now and it's zipping along. Guardian is reading 1.19v under load.

Edit: Late pass

[Bal3Wolf]

Ya its wierd but so far i love this board its super fast just got another stick of ram to put me back in dual channel cant wait till i get 4 gigs in this. Whats the cpu gtl voltage do i havet touched mine so far.