DFI Lanparty DK P35-T2RS Thread

[bobfig]

if you have the card use it. its going to give better sound and is better quality then the onboard.

[jirotrom]

Thanks will do, I have another question. Do any of you have a problem with your mouse laser cutting out. Mine constantly cuts out, both of my mice do. I'm starting to think its the board.

[bobfig]

hay guys i need help. i just added water cooling to my computer but now it doesn't turn on all the way. when i plug it in it turns all the fans on for like 3 sec and then shuts off. i lapped the cpu and cooler. when i unplug my 8pin header then it stays on but no vid or post. could it be the motherboard or the cpu?

[wire]

Originally Posted by bobfig

hay guys i need help. i just added water cooling to my computer but now it doesn't turn on all the way. when i plug it in it turns all the fans on for like 3 sec and then shuts off. i lapped the cpu and cooler. when i unplug my 8pin header then it stays on but no vid or post. could it be the motherboard or the cpu?

It sounds like you're shorting out your motherboard. Try taking it out and look for any loose screws.

[bobfig]

Originally Posted by wire

It sounds like you're shorting out your motherboard. Try taking it out and look for any loose screws.

hay thanks it sorta was that i finely found out that it was that i cut a cupple of traces on the back.

[jirotrom]

I think I'm having a faulty USB drive, various things plugged into the usbs no matter which port seem to cut off and on... anyone know of a fix?

[wire]

Originally Posted by jirotrom

I think I'm having a faulty USB drive, various things plugged into the usbs no matter which port seem to cut off and on... anyone know of a fix?

I would check the USB connections to the motherboard and make sure they are secure.

[jirotrom]

^^^ they are :/

[Koaka]

Is it somehow possible to get a 8.5 multiplier in the bios?

[bobfig]

Originally Posted by Koaka

Is it somehow possible to get a 8.5 multiplier in the bios?

yes its possable

its the "cpu n/2 ratio"