DFI Lanparty DK P35-T2RS Thread

[ChrisB17]

all right that sound ok. I think Im going to get a dremel to cut that little K8 peice of. I wouldnt buy another AMD cpu anyways so I dont card. And I might as well sand the bracket a little bit to make sure it all fits. Thanks again for the help.

[shiloh]

Originally Posted by ChrisB17

all right that sound ok. I think Im going to get a dremel to cut that little K8 peice of. I wouldnt buy another AMD cpu anyways so I dont card. And I might as well sand the bracket a little bit to make sure it all fits. Thanks again for the help.

for the NB issue, another way of doing it would be to take out the fan and put some spacers between the top of the tower and the cover that hold the fan. This way the fan will sit a little bit higher in the TT and clear the NB heatsink.

[ChrisB17]

Ohh thats a good idea. What kind of spacers? Like ones you can find at a hardware store or do they have to be computer ones or somthing?

[shiloh]

Originally Posted by ChrisB17

Ohh thats a good idea. What kind of spacers? Like ones you can find at a hardware store or do they have to be computer ones or somthing?

whatever you can get your hands on. My thinking would be to use a couple of small piece of rubber to prevent vibration noise.

[ChrisB17]

all right thanks again. I will go to the store today and see what I can find. That Idea was awsome I will definitly try that.

[Retrolock]

Hi! First post here! I already got a Blood Iron the other day but because of the bios was not updated, I wasn't able to use it. So I sent the BI back and I will replace it with DK P35! The black PCB reminds me of P5B Deluxe, which I loved so much!

I do hope the Ultima90 fits it without doing any mods!

[MADMAX22]

Well hopefully for you it wont be anything like the p5b-d.

Welcome to the forums and good job on filling out your system specs.

[Sonic]

Originally Posted by Retrolock

Hi! First post here! I already got a Blood Iron the other day but because of the bios was not updated, I wasn't able to use it. So I sent the BI back and I will replace it with DK P35! The black PCB reminds me of P5B Deluxe, which I loved so much!

I do hope the Ultima90 fits it without doing any mods!

Let us know if the E8400 works out of the box with the DK P35.

[Sonic]

Pics!

[shiloh]

nice pics!

you're gonna have fun with this board.

I am currently testing my fsb for stability at 475mhz. 3 hours so far on Prime95 and looking good. the Q6600 is at 6x (2850mhz) for the time being but as soon as I am satisfied with my FSB stabilty and I will move it to 8x to achieve my goal of 3.8 on air.