DFI Lanparty DK P35-T2RS Thread

[criminal]

Originally Posted by wigseryc

Also, how's that PCI Slot Fan help with your temps? I assume it's there to drag air over the Accelero and out of the case?

Exactly. Does really well. idle at like 37C and load between 55 and 58C.

[Bal3Wolf]

I hear the tuniq tower will fit if you cut the a small peice off the mount plate or face it towards top of case thats what i probly will do when my dk comes in today.

[PCModifiers]

Originally Posted by criminal

Untrue. (See pic below)

How much does the TRUE extend past the top of the motherboard? I have a tight case to fit it in and I am afraid it will hit into my power supply.

[barong]

first off all, sorry if my english its not good
im having problem with my dfi dk p35 t2rs, make me confuse about the vcore
the case :

i set the vcore 1.4 and i check it at is was 1.4 but when i got into windows it show that the vcore was 1.36, icheck using cpuz, ite smart guardian , hardwaremonitor and everest, can someone help me solve this problem? please anyone im desperate

[TheCh3F]

Originally Posted by barong

first off all, sorry if my english its not good
im having problem with my dfi dk p35 t2rs, make me confuse about the vcore
the case :

i set the vcore 1.4 and i check it at is was 1.4 but when i got into windows it show that the vcore was 1.36, icheck using cpuz, ite smart guardian , hardwaremonitor and everest, can someone help me solve this problem? please anyone im desperate

The board has vdroop which causes the voltage set in the BIOS to be lower than what is reported within windows. Its normal for this to happen as we all experience it.

[Bal3Wolf]

Thier is a droop mod for this board tho on page 1.

[Eazy-A]

Originally Posted by criminal

No modification was needed. Fit on there perfect... tight fit but it worked without issue.

TRUE has been ordered. I was just going to get the Ultra-120, but then I decided to get XTREME!!!

(if it doesn't fit, I'll hunt you down...)

j/k

[Bal3Wolf]

My dk just arived gonna setup stuff in a little while and run raid 0 on my 2 320 gig drives.

[tehpwnerofn00bs]

I just got my LT X38 board in, but I'm getting a 7F error code. What's wrong? I'm so confused....

[Bal3Wolf]

Just got my dk setup 2x 320gigs in raid 0 on hdtach i avg 129megs pretty good jump one 320 did 49-53megs avg. 1 thing suprised me im using one 1gig of ram cause i had another chip die with vista 64 and the raid 0 its still responding super fast not lagging at all like i thought it would and im at stock right now not overclocked.