Asus Maximus Information and Help area - Page 4 - Overclock.net

yannis7777 · 03-02-08

Actually i noticed the same behaviour on my mobo like the part with the RAM voltage you said. One good thing to do is check your hardware monitor feature and you may find out the real voltages for NB, SB, RAM once you have set a value. I use this trick and then bring the values down to where they should be (e.g. 2.06v for 2.1 like you said before).

ElMikeTheMike · 03-02-08

What are the odds of succesfully running a 500 FSB with a multiplier of 7? I'm thinking of trying this out.

BigKriss · 03-02-08

Quote:

Originally Posted by ElMikeTheMike

What are the odds of succesfully running a 500 FSB with a multiplier of 7? I'm thinking of trying this out.

I will be watching in anticipation...

binormalkilla · 03-02-08

Quote:

Originally Posted by ElMikeTheMike

What are the odds of succesfully running a 500 FSB with a multiplier of 7? I'm thinking of trying this out.

It will be tough with a quad....

BigKriss · 03-02-08

Quick quessy guys,I have just fitted another sata 160 G drive to my sig rig..hardware loads drivers etc,but I cannot access it anywhere..also does not show as an additional drive in "my computor" Its a slimline seagate with the selectable speed bridge thingy...my other sata drives dont have that,only slave and master stuff...
Ill check for suggestions in the morning,sleepy time in Africa now..

binormalkilla · 03-02-08

DDR2-1140 SuperPi 32M 475 FSB 3.8 GHz

TheNix · 03-02-08

Quote:

Originally Posted by BigKriss

Quick quessy guys,I have just fitted another sata 160 G drive to my sig rig..hardware loads drivers etc,but I cannot access it anywhere..also does not show as an additional drive in "my computor" Its a slimline seagate with the selectable speed bridge thingy...my other sata drives dont have that,only slave and master stuff...
Ill check for suggestions in the morning,sleepy time in Africa now..

Is the drive partitioned? You can see if it is under the Disk management tool, go to Control panel, Administrative tools, double click Computer management and then on the left column select the Disk management option (or under vista press start and type Computer management and press enter)

x2s3w4 · 03-02-08

Quote:

Originally Posted by YahonMaizosz

Ok. So here is how I set up my BIOS to be.

CPU Volt: 1.50v (CPU-Z is seeing it at 1.440v)
DRAM Volt: 2.14v (Asus Probe is seeing it at 2.19v)
CPU SPread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
RAM Timing: 5-5-5-15

The other settings are Auto.
These are the data from ASUS pc PROBE 2:
Vcore: 1.45v (Manually set @ 1.5v)
+3.3: 3.2v (AUTO)
+5: 5.06v (AUTO)
+12: 12.10v (AUTO)
SB: 1.06v (AUTO)
SB2: 1.52v (AUTO)
SFBT: 1.42v (AUTO)
DRAM: 2.19v (Manually set at 2.14v)
DRAM Ref: 1.09v (AUTO)
NB: 1.36v (AUTO)

Hope that these info helps.

Set your FSB strap to NB to 333 and try again.If you can't hit it there try 400 instead.

BigKriss · 03-02-08

Thanks Nix..appropriately appreciated..

YahonMaizosz · 03-04-08

I had tried what x2s3w4 had suggested me to do.. I had updated all my motherboard bios and drivers to their latest version. Still, no luck for me to run my 4x2GB stick in DDR2 1000 (Which is its own stock speed)..

HERE is the link to my OCZ RAM..

		Overclock.net - Overclocking.net > Intel > Intel Motherboards
Asus Maximus Information and Help area

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)