ljason8eg

The only one i can find is for the CPU fan, and it's temperature (tcase, I believe) controlled.

Brythe

Also the Plus officially supports 1066 Mhz RAM.

__________________

astraelraen

What about memory command rate? Mine is defaulting to 1T. I can set it up to 1000mhz and it will still try to boot up using 1T command rate.

I tried T2 dispatch and it didn't do anything.

I also changed something that had to do with channel "skew" and it didn't change it.

edit: It only took me 58 minutes of messing in the bios.

The setting for this board is in the advanced section of the Bios. Under "clock setting fine delay" if you scroll all the way to the bottom there are two entries.

Channel 1 command to CS delay
Channel 2 command to CS delay

Set these to 2CLK

Iceman0803

I think if you run your RAM in the yellow slots it will run at 2T. I could be wrong though.

__________________

Blameless

Has anyone checked for max FSB on 45nm Quads with this board?

DaCrusader

Depends completely on your chip/cooling/ a billion other things... but I wouldn't mind having a go with a Q6600 for 4GHz...

__________________

astraelraen

I have 1gb dimms in all 4 slots. It defaults to 1T unless you change something in the bios.


I tried my G0 Q6600 for awhile in this board before I switched out to an E8500. I couldn't manage much more than 3.4ghz stable. I could boot up to 3.6, but I could never get into windows at that speed. I don't think it was the best Q6600 though I had trouble on my old 680i getting it up past 3.2ghz.

Blameless

In my experience, most motherboards reach their limit (with quads) far before my CPU does.

Iceman0803

I didn't notice that. Sorry.

__________________

.Style

I'd like to chime in as to the question regarding whats the difference with the plus and non-plus version...I want to get the non plus version because thats the only one i can find in the UK...If there is something extremely good about the plus version i'll search further...

Thanks

__________________