DFI Lanparty DK P45-T2RS Plus Thread - Page 4 - Overclock.net

DaCrusader · 09-14-08

Quote:

Originally Posted by .Style

I'd like to chime in as to the question regarding whats the difference with the plus and non-plus version...I want to get the non plus version because thats the only one i can find in the UK...If there is something extremely good about the plus version i'll search further...

Thanks

Offically supports 1066 ram, different (better) bios, 2 extra sata ports. I would just wait for the plus... it can't be very far away....

edit: 700 epic toasts!

astraelraen · 09-14-08

Quote:

Originally Posted by astraelraen

What about memory command rate? Mine is defaulting to 1T. I can set it up to 1000mhz and it will still try to boot up using 1T command rate.

I tried T2 dispatch and it didn't do anything.

I also changed something that had to do with channel "skew" and it didn't change it.

edit: It only took me 58 minutes of messing in the bios.

The setting for this board is in the advanced section of the Bios. Under "clock setting fine delay" if you scroll all the way to the bottom there are two entries.

Channel 1 command to CS delay
Channel 2 command to CS delay

Set these to 2CLK

After experimenting further this does not cause the ram to be set to 2T. I changed this setting back to 1 CLK and it still is choosing 2T. Even with EVERY Ram option in the bios is set to default and its choosing 2T.

Before, with every ram option set to default it was choosing 1T. Gonna have to email DFI..

kathman · 09-17-08

Might be buying this board next weekend

, cant wait, will edit post with ocing results

ljason8eg · 09-17-08

Ok I've hit a wall in my OCing efforts. I can't get past 3.42GHz without lockups in games. Thing is, prime95 is still 8 hours stable, but games will lock up in a matter of minutes. I'm really inexperienced with the DFI BIOS, so i thought someone could help me out here. I've really only changed a few settings:

All that thermal management stuff is off
CPU vcore is at 1.42v
CPU VTT (FSB, correct?) is at 1.3v
NB is at 1.3v
The RAM is running at 760MHz (800MHz RAM, so it's below stock speed) in the 400/800 strap at stock volts (1.9v)

I think that's all i've changed. Am I missing something here, and it is ok to go higher on the NB and VTT voltage?

DaCrusader · 09-19-08

Quote:

Originally Posted by ljason8eg

Ok I've hit a wall in my OCing efforts. I can't get past 3.42GHz without lockups in games. Thing is, prime95 is still 8 hours stable, but games will lock up in a matter of minutes. I'm really inexperienced with the DFI BIOS, so i thought someone could help me out here. I've really only changed a few settings:

All that thermal management stuff is off
CPU vcore is at 1.42v
CPU VTT (FSB, correct?) is at 1.3v
NB is at 1.3v
The RAM is running at 760MHz (800MHz RAM, so it's below stock speed) in the 400/800 strap at stock volts (1.9v)

I think that's all i've changed. Am I missing something here, and it is ok to go higher on the NB and VTT voltage?

NB could quite possibly need more volts... I am not sure about the VTT but I don't believe that it is the FSB, i could be wrong however.

ljason8eg · 09-19-08

Quote:

Originally Posted by DaCrusader

NB could quite possibly need more volts... I am not sure about the VTT but I don't believe that it is the FSB, i could be wrong however.

Ah ok i'll try more volts on the NB, but what's the safe amount of voltage for it if i'm using the stock chipset cooler?

finnzwerg · 09-20-08

i have got the complete watercooling set for the board ^^

redline4 · 09-28-08

Quote:

Originally Posted by finnzwerg

i have got the complete watercooling set for the board ^^

your missing a sata connector There should be a yellow looking one right beside those 3 orange ones.

Murderous Moppet · 09-28-08

Quote:

Originally Posted by redline4

your missing a sata connector There should be a yellow looking one right beside those 3 orange ones.

Only the T2RS+ has the yellow connector there. The pic in the OP is of the plus board.

Hondacity · 10-01-08

mosfet blocks for wc already available at performance pcs

too bad its 96$ for a pair and including shipping

will post oc later on....

		Overclock.net - Overclocking.net > Intel > Intel Motherboards
DFI Lanparty DK P45-T2RS Plus Thread

09-20-08	#37 (permalink)
finnzwerg New to Overclock.net Join Date: Feb 2008 Posts: 16 Rep: 3 Unique Rep: 3 Trader Rating: 0	i have got the complete watercooling set for the board ^^

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)