Asus Rampage Extreme Overclocking Guide - Page 22 - Overclock.net

$SpEEdFreAk$ · 06-28-09

Quote:

Originally Posted by Kavourdoukos

Thanks i will probably take my pc at shop to have it checked so i am covered from waranty problems.I have heard of that TRUE too.

With all due respect, you have a relatively high end system, but your temps in particular are off the Richter. You need all the help you can get from ppl who know how to guide you.
Again, I think Ghostleader is being very gracious with his time.
My suggestion is rep, respect and go with the suggestions from GL. This sort of thing takes (potentially) a lot of time and unlike your PC store, is free of charge...
All the best

Kavourdoukos · 06-28-09

Quote:

Originally Posted by $SpEEdFreAk$

With all due respect, you have a relatively high end system, but your temps in particular are off the Richter. You need all the help you can get from ppl who know how to guide you.
Again, I think Ghostleader is being very gracious with his time.
My suggestion is rep, respect and go with the suggestions from GL. This sort of thing takes (potentially) a lot of time and unlike your PC store, is free of charge...
All the best

But the check up i'll take from my pc store is free of charge too.Btw what is the temp i should have on my q9550 with my cooler on cosmos case?No o/c neither full load..

$SpEEdFreAk$ · 06-29-09

Quote:

Originally Posted by Kavourdoukos

But the check up i'll take from my pc store is free of charge too.Btw what is the temp i should have on my q9550 with my cooler on cosmos case?No o/c neither full load..

Yeah, fair enough. It depends on your store however. If they set your rig up to begin with, they haven't done a very good job, so a lot of that depends on the store and ppl with whom you deal.

I certainly wouldn't mention OCing. Your stock temps are the worst I've seen, so asking what they should be is imo somewhat down the track. Get your rig checked out first, ask lots of questions and once that's done, come back with your results.

GL wrote he'd be here when you returned, which is great for you. I'd say follow his lead and go from there. Given (from what I've seen) many of your temps are over the top, not just vcore, I agree that it's more likely to be beyond your cooler.

Look at the big picture, take action and best of luck

Ghostleader · 07-04-09

I start to work with my 2x2 Transcend aXeRAM TX1800KLU-4GK DDR3 1800MHz 888 24@1,80v again and this time I´m determent to make them work (did a short test a while back, no success then).

Have big problems to get them stable with bios up to 1104, with 1104 it´s seem to get somewhat better, I´m with 1202 now and it seems to be a little bit better then 1104 but not stable enough.

Sinner · 07-04-09

Good luck, mate. I'd love to see you succeed.

Ghostleader · 07-05-09

Quote:

Originally Posted by Sinner

Good luck, mate. I'd love to see you succeed.

Thank you Sinner, much apprecieted.

I ran a P95 custom blend (4 instances of 875mb, no affinity set) for 8hrs before a stoped it, good enough for me but one thing puzzles me though and it´s when I run LinX (max problem size, max memory use) it give me a error right after the first run and I can´t figur it out why and anything above 32mb memory use throw me an error, hmmm.

Here´s a screenie with P95 custom blend (4 instances of 875mb, no affinity set) @ 450 4,05 2x2Gb 1800 888 24 2T Strong tRD 7.

Kavourdoukos · 07-05-09

Yesterday a lightning striked the house next to mine.After that my pc cant boot.I press the power-on button but nothing...My lcd poster has this info "cpu init".What do u think is corrupt?mobo-cpu or psu?

Sinner · 07-05-09

Check your BIOS values, maybe they are mesed up.

If not, try to restart CMOS; you have a button on back of your case. LCD poster shows weird stuff after sudden blackouts.

Kavourdoukos · 07-06-09

Sorry it was mine mistake.The problem is not that is not booting up.The problem is that it does not run at all.I press the power-on button and nothing hapens.Hopefully i have warranty.....

Ghostleader · 07-06-09

Quote:

Originally Posted by Kavourdoukos

Sorry it was mine mistake.The problem is not that is not booting up.The problem is that it does not run at all.I press the power-on button and nothing hapens.Hopefully i have warranty.....

Sorry to here about that lightning thing, good luck with the warranty.

		Overclock.net - Overclocking.net > Intel > Intel Motherboards
Asus Rampage Extreme Overclocking Guide

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)