Rampage Extreme 1202 Bios Template

Extreme Tweaker

Ai Overclock Tuner           [Manual,Auto,X.M.P,CPU Level Up,Memory Level Up]
OC From Memory Level Up      [Auto,PC3-11600,PC-12800]
FSB Frequency                []
CPU Ratio Setting            []

> CPU configuration 
CPU Ratio Setting            []
C1E Support                  [Disabled,Enabled]
CpU TM Function              [Disabled,Enabled]
Max CPUID Value Limit        [Disabled,Enabled]
Vanderpool Technology        [Disabled,Enabled]
Execute Disable Bit          [Disabled,Enabled]
Core MultiPprocessing        [Disabled,Enabled]

* CPU clock skew             []
* NB clock skew              []
FSB Strap to North Bridge    [Auto,200,266,333,400]
PCIE Frequency               [100]
DRAM Frequency               [] 
DRAM Command Rate            [Auto,1N,2N]
DRAM Timing Control          [Auto,Manual]

1st information
CAS# Latency                 []
RAS# to CAS# Delay           []
RAS# PRE Time                []
RAS# ACT Time                []
RAS# to RAS# Delay           [Auto]
REF Cycle Time               [Auto]
WRITE Recovery Time          [Auto]
READ to PRE Time             [Auto]

2nd information
READ to WRITE Delay(S/D)     [Auto]
WRITE to READ Delay(S)       [Auto]
WRITE to READ Delay(D)       [Auto]
READ to READ Delay(S)        [Auto]
READ to READ Delay(D)        [Auto]
WRITE to WRITE Delay(S)      [Auto]
WRITE to WRITE Delay(D)      [Auto]

3rd information
WRITE to PRE Delay           [Auto]
READ to PRE Delay            [Auto]
PRE to PRE Delay             [Auto]
ALL PRE to ACT Delay         [Auto]
ALL PRE to REF Delay         [Auto]

DRAM Static Read Control     [Auto,enabled,disabled]
DRAM Dynamic Write Control   [Auto,enabled,disabled]

> DRAM Skew Control : 
DRAM CMD Skew on Channel A   [Auto]
DRAM CLK Skew on DIMM A1     [Auto]
DRAM CLK Skew on DIMM A2     [Auto]
DRAM CTL Skew on DIMM A1     [Auto]
DRAM CLT Skew on DIMM A2     [Auto]

DRAM CMD Skew on Channel B   [Auto]
DRAM CLK Skew on DIMM B1     [Auto]
DRAM CLK Skew on DIMM B2     [Auto]
DRAM CTL Skew on DIMM B1     [Auto]
DRAM CTL Skew on DIMM B2     [Auto]

Ai Clock Twister             [Auto,Lighter,Light,Moderate,Strong,Stronger]
Ai Transaction Booster       [Auto,Manual]

(-- Manual --)

Common Performance Level     []

Pull in of CHA PH1           [Disabled] 
Pull in of CHA PH2           [Disabled]
Pull in of CHB PH1           [Disabled]
Pull in of CHB PH2           [Disabled]

(-- Manual --)

EPU II Phase Control         [Auto,Full Phase]

*** Please key in numbers or select voltage!***
CPU Voltage                  []
Load-Line Calibration        [Auto,Disabled,Enabled]
CPU PLL Voltage              []
FSB Termination Voltage      []
CPU GTLVref(0)               [Auto]
CPU GTLVref(1)               [Auto]
CPU GTLVref(2)               [Auto]
CPU GTLVref(3)               [Auto]
NB GTLVref                   [Auto]
North Bridge Voltage         []
DRAM Voltage                 []
NB DDRVref                   [Auto]
DDR3 Channel A Vref          [Auto]
DDR3 Channel B Vref          [Auto]
South Bridge 1.5 Voltage     []
South Bridge 1.05 Voltage    []

******************************************
CPU Spread Spectrum          [Auto,Disabled]
PCIE Spread Spectrum         [Auto,Disabled]