tkserenity

I have the DFI LANPARTY DK P35-T2RS motherboard. The bios are really hard

and strange to follow because it’s DFI. I need to know how I can add more

voltage to my CPU I’m running an E8600. My stock voltage is 1.20v. I want

to know how I can raise it to 1.3. So I’m assuming I go into my “Special

adds” DFI feature and it gives numbers to add to my current voltage (I

think). Example the numbers it gives me +12.5mv, +25.0mv and so on. What

do I add to make 1.20 to 1.30 voltages? I’m trying to hit 4 GHz on my E8600.

I’m starting to wish I never bought this board the bios are really hard a

beginner overclocking like me.

Kasaris

Here is a link to a Bios Guide for the DFI Boards you can check out, it has a lot of good info.

http://www.clunk.org.uk/forums/hardw...herboards.html

dmhnc

What BIOS version do you have now? Have you updated since install or do you just have loaded what came on install cd?

tkserenity

I'm not sure what version of bios. I bought my motherboard about 2 weeks ago.My bios is very different to people that have my board. Mine DFI "special add" adds with MV not % like most people have it. So now i'm confused..

tkserenity

i think its bios version 6.

dmhnc

Going out to eat, I'll post back if no one has helped. Or I will PM you.

dmhnc

Update your BIOS HERE. Top one is if you have a floppy drive if not use the second one. Click on "instruction guide" it will explain how to flash without a floppy drive using winflash.
After you update restart and click delete key before windows starts to load. Best to just keep pressing the key till you see BIOS screen setup. Read link that's in post 2 it explains BIOS setting and what to set. Also found here. This will guide you till you get familiar with the BIOS settings. If you have any more questions just ask in this thread. Good luck.

BTW I've hit 4.0 with less than 1.2v so you should be able to hit 4.0 with no increase. To go past 4.2 though you might need to increase vcore.