|
|
|
02-07-09
|
#1551 (permalink) | ||||||||||||||
|
PC Gamer
 
|
Quote:
My board is very picky about ram speed, with my 2x1 Kingston HyperX PC9600 I have the following issues. 800@FSB 333, okey 1066@FSB 333, no way 800@FSB 400, okey 1066@FSB 400, no way 1080@FSB 450, no way 1200MHz@FSB 450, okey 1200MHz@FSB 500, no way run 1:1 is no problem, so for now I stay with it. It´s also very sensitive with MCH ref, I´m stable with 0.840v, if I go one step up to 0.880v LinX error within 3min and if I go one step down to 0.800v LinX error within 3min Here´s a screenie with Q9650 / 500 / 4,0 / 2x1 HyperX PC9600@1000 / 555 15 / tRD10. Stable with 50 loop LinX (max problem size and max memory use), Prime95 blend 2hrs and 30 loop (~2hrs) Crysis Assault Harbor@high.  Now it´s time to leave XP (32bit) and go to Windows 7 (64bit) for some 2x2 and 4x2 ram test.
__________________
**Asus Maximus III Formula Owners Thread** Asus Rampage Extreme Overclocking Guide Current Bench Rig
Rampage II Extreme / i7 975 / Corsair Dominator GT 2000C8 / OZC Blade LV 2000C7
|
||||||||||||||
|
|
|
02-07-09
|
#1552 (permalink) | ||||
|
Phenom II Guru
 
|
Quote:
Quote:
Ram is PC2-6400 800MHz w/ 5-4-4-12 1.8V on stock. Proper volts have been set. Quote:
Quote:
|
||||
|
|
|
02-07-09
|
#1553 (permalink) | ||||||||||||
|
Overclocker
 
|
once my tax return gets here... UD3R + Q9650 here i come!! 4ghz+ is my goal.. should be quite attainable, no?
what bios does this board ship with, F3? i really dont like flashing bios, even though its reeeeally easy with gigabyte boards and their qflash utility.. well after looking on the UD3R's gigabyte page it seems that F4 and F5 dont really seem to add much. so i guess that answers my question, i probably wont need to do any flashing
__________________
E8400 E0 18hr Orthos Blend @ 4005mhz "Buy the Ticket, Take the Ride" Quote:
GA-EP35-DS3L + E8400 ->4.23ghz GA-G31M-S2L + E2180 ->3.15Ghz
|
||||||||||||
|
|
|
|
02-07-09
|
#1554 (permalink) | |||||||||||||
|
The Dark Passenger
 
|
easily. I was able to hit 4 ghz within about 3 minutes of tweaking.
the combo is an i7920 killer... The UD3R comes with F3 which is apparently quite stable.
|
|||||||||||||
|
|
|
02-07-09
|
#1555 (permalink) | |||||||||||||
|
Overclocker
|
Quote:
 so you went right from 333x9 to 445x9 and it booted right up? thats sweet. 1.18VID thats a nice chip you have there. i hope i get lucky as well  i hope my mushkin's overclock well since i want to push the 9x multi as far as i can.. i want to use a 2.4 mem multi so i can get to around 460-500fsb the ram you are running is rated 1066 right?
__________________
E8400 E0 18hr Orthos Blend @ 4005mhz "Buy the Ticket, Take the Ride" Quote:
GA-EP35-DS3L + E8400 ->4.23ghz GA-G31M-S2L + E2180 ->3.15Ghz
|
|||||||||||||
|
|
|
|
02-07-09
|
#1556 (permalink) | |||||||||||||
|
The Dark Passenger
|
the only things I had to change in voltages were vcore and ram voltage.
__________________Everything else stayed the same.
|
|||||||||||||
|
|
|
|
02-07-09
|
#1557 (permalink) | |||||||||||||
|
4.0 GHz
|
is there a vdrop mod on this board?
__________________i know there is a setting, i forget the name, but isn't that only for non 45nm cpus?
|
|||||||||||||
|
|
|
|
02-07-09
|
#1559 (permalink) | |||||||||||||
|
4.0 GHz
|
okay, but not for 45nm cpus, correct?
__________________so is there a pencil mod?
|
|||||||||||||
|
|
|
|
02-07-09
|
#1560 (permalink) | |||||||||||||
|
4.0 GHz
|
also is there a way to unlock the cpu and the ram?
__________________
|
|||||||||||||
|
|
|
 |
| Tags |
| best 775 motherboard, ep45-ud3p, gigabyte, ud3l, ud3lr, ud3r |
| Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
| XtremeCuztoms |
| Thread Tools | |
|
|
it might not be a bad idea to consider swapping out.
