Deezle98

Proud new owner of a new UD3P, having trouble getting 4GHz stable, no problem with my 780i... I'm really confused with all the extra voltage settings this board has and suspect it's part of my stability problem, anyone have a quick and dirty explanation?

__________________
"Build a man a fire, he'll be warm for a night. Set a man on fire, he'll be warm for the rest of his life."
22,294 3DMark 06 (SLI 8800GTs)

Yomny

i need some help, i cant seem to be able to run an FSB higher than 390. I have everything on stock settings, not auto but no matter how high of a MCH voltage i set it wont boot. I'm just testing FSB with the lowest multi set. Any other settings that you guys would recommend adjusting to be able to boot higher? What was the highest FSB you were able to boot at with stock MCH voltages. Thank you

__________________

I7 920 @ 4GHz w/1.36 u_load
Q6600 @ 3.3 w/1.49 u_load
AMD 4200 @ 2.75 w/1.4 u_load

TheCh3F

Wow i just got this board yesterday and I am absolutely impressed. Coming from a DFI DK X38-T2R that could handle ~475 FSB on my Q6600 I have high expectations for the UD3P. My first OC was simply just to see what it could do. I haven't seen any vdroop yet (LLC on) and I can undervolt my Q6600 (1.2750 vid) and run a weak 9x356 at only 1.248v stable for 9 hours. This is very promising considering my quad has seen 4100+ Mhz. I LOVE THIS MOBO ALREADY!

edit: however I think one of my NIC's is dead. Only gripe but hey, I can live with one for now.

Attached Thumbnails

 

__________________

CPU/NB Loop: HK 3.0 :: Bloodrage NB :: GTX360 :: H1011's :: 655v :: TYGON 3606 7/16"

Q6600 G0 4.1GHz on water
Core i7 C0 4GHz on water
955 BE 4GHz on water
Core i7 D0 4.4GHz on air

elusiv1

I have to have LLC enabled on my OC, i tried it without LLC and the vdroop just scared the heck out of me.

__________________

Windows 7║Fan Club

elusiv1

+1: This motherboard is awesome isn't it.. About your NIC card, i've had my board for about 2 months now and i still don't understand why there are 2 Realtek Gigabit NIC controllers in my device manager, are you supposed to use both controllers for more bandwith or something?

__________________

Windows 7║Fan Club

Enyalius

You can. There is a technology called "Teaming" that allows you to use two Ethernet cards as one virtual card, theoretically raising your data transfer rates. You can also use it for things like ICS (Internet Connection Sharing), where you have the internet going in through one of the NICs and then use your computer as a DHCP Server/Firewall or what have you, passing that stuff through the second NIC to a switch or other hardware..

__________________
I did error10's Windows Challenge and I now have lost two IQ points!

elusiv1

REP+, thank you very much for that information Enyalius..

__________________

Windows 7║Fan Club

-n7-

Is there any way to get this board to a higher FSB with a quad without insanely high VTT?

And what is this board doing on auto.

I cannot get thing remotely stable or even to POST at a high FSB unless i use most everything auto.

Here's what i just did.

Q9550 @ 7x477 (way below it's max OC)
1.4vcore
AUTO VTT (ET6 reads 1.5)
AUTO CPU reference (ET6 reads 0.76)
1.59pll
AUTO MCH everything (ET6 reads as 1.2)
AUTO MCH reference (ET6 reads as 0.76)

It runs P95 blend stable, & IBT 5 passes stable.

So i go into BIOS & change VTT to 1.5 manual + GTL to 0.76 (both values same as being reported AUTO), & the damn board cannot POST.

So *** magic is AUTO doing?
I don't want to be pumping 1.5vtt into my chip...i only needed 1.34v on my P5Q-D.

I assume ET6 is reading things wrong...

Any ideas would be great.

Kaji

My Q6600 won't over clock.

In the BIOS I have the FSB set to 360x9, but whenever I run CPU-Z, its always 266x9.

I'm running Prime95 right now, SmallFFT's, and the bus speed is still 266x9.

Whenever I boot and go to BIOS -> M.I.T settings, It shows my computer at 3.2ghz, but when I boot into Vista x64 and start CPU-Z, still 2.4ghz.

If anyone needs anymore information pertaining to my BIOS or anything, will post ASAP, I wanna overclock on this beastly motherboard.

Thanks.

(Just updated my system specs.)

__________________

Villainstone

It's funny because I loved this MB so much I decided to use the UD5P in my i7 build next week. I am not for sure that I am getting UD5P but right now it is in my shopping cart waiting for my tax return money.

__________________