Overclock.net - Overclocking.net
     
 
Home Gallery Reviews Blogs Register Today's Posts Mark Forums Read Members List


Go Back   Overclock.net - Overclocking.net > Intel > Intel Motherboards
Reload this Page Gigabyte EP45-UD3P Owners Guide

Reply
Page 159 of 794 « First 59109149155156157158 159 160161162163169209259659 Last »
View First Unread View First Unread  
LinkBack Thread Tools
Old 02-08-09   #1581 (permalink)
New to Overclock.net
 
intel ati

Join Date: Jul 2007
Posts: 18

Rep: 1 BiuS Unknown
Unique Rep: 1
Trader Rating: 0
Default
I`m really don`t know what i can do to get stable over 500 FSB... Now i`m playing with 520 but my goal is 530, But i tried every possible combination in BIOS and in ET6 but doesn`t work very well, With settings below i can run ORTHOS small FTT for 20 min then program crash. Blend test fails immediately. I saw many people getting stable at 550, 540... etc, i believe i can do that as well just need figure out how.

__________________
System: My System
CPU
E8500 4.25Ghz (8.5x500)		 Motherboard
GA-P45-UD3P		 Memory
2x1GB Crucial Ballistix PC2-8500 		Graphics Card
ASUS HD3650
Hard Drive
2x Seagate 500GB 7200.11 RAID0		 Power Supply
CoolerMaster RealPower 520		 Case
Antec Nine Hundred II
CPU cooling
True120+Scythe 110CFM		 OS
Windows 7		 Monitor
Acer 22"
BiuS is offline   Reply With Quote
Old 02-08-09   #1582 (permalink)
Intel Overclocker
 
f16-r1's Avatar
 
intel nvidia

Join Date: Jul 2007
Location: Homer, GA
Posts: 690

Rep: 38 f16-r1 is acknowledged by some
Unique Rep: 33
Trader Rating: 0
Default
ok so after having this board for quite a while i had windows vista ult x64 installed which was install from a ide dvd rom drive. my main HD crashed and i am trying to install windows and it wont boot from CD. the rev of my board is 1.0 i was running the f7 bios but i went back to f6 just in case it was the bios being flaky. now i have tried two different bioses, two different ide cables and two different dvd rom drives that work in two other machines. and it doesnt show up in bios or let me boot from a cd or dvd where as the same cd on two other rigs worked. any suggestions? i am freaking out cause if i cant intall a os on my main rig it is useless until i can. i am wondering why before my ide dvd rom drive showed up and now its not showing any ide dvd rom drive i pop in.

System: My Baby
CPU
Q9650 @ 4.05ghz 24/7 (450 x 9)		 Motherboard
Gigabyte EP45-UD3P		 Memory
G.Skill 8GBPI 4x2gb 		Graphics Card
EVGA GTX260 core 216
Hard Drive
300GB-VR,2 x 320gb(raid 0), 500gb,750gb, 1tb sata		 Sound Card
X-FI TItanium		 Power Supply
Antec Quattro 1000watt		 Case
Antec 1200
CPU cooling
Apogee GTZ		 GPU cooling
Air		 OS
Xp pro(x86-VM)/Vista Ult(x64) SP1/Win 7 beta/		 Monitor
2 x Samsung 245bw res @ 1920x1200
f16-r1 is offline   Reply With Quote
Old 02-08-09   #1583 (permalink)
4.0ghz
 
redalert's Avatar
 
intel ati

Join Date: Apr 2008
Location: Philly
Posts: 2,692

Rep: 332 redalert is a proven memberredalert is a proven memberredalert is a proven memberredalert is a proven member
Unique Rep: 268
Trader Rating: 18
Default
BiuS raise the cpu pll voltage to 1.57 and raise cpu termination to 1.34 and see what happens
__________________

Q9450 4.0ghz

System: My System
CPU
i7 920 @ 185x21 HT		 Motherboard
Asus P6T		 Memory
6GB Corsair XMS3 DDR3 1600 		Graphics Card
SAPPHIRE 100245L Radeon HD 4850 512MB
Hard Drive
WD 150GB VelocityRaptor		 Sound Card
Asus Xonar D2X		 Power Supply
SILVERSTONE ST70F 700W		 Case
HAF 922
CPU cooling
MegaPrime w/Panaflo		 OS
Win7 64		 Monitor
Samsung 2333SW 23"
redalert is offline Overclocked Account   Reply With Quote
Old 02-08-09   #1584 (permalink)
4.0 GHz
 
orbiter's Avatar
 
intel nvidia

Join Date: Nov 2007
Location: Southport - UK
Posts: 1,478

Rep: 177 orbiter is acknowledged by manyorbiter is acknowledged by many
Unique Rep: 153
Trader Rating: 0
Default
Quote:
Originally Posted by f16-r1 View Post
ok so after having this board for quite a while i had windows vista ult x64 installed which was install from a ide dvd rom drive. my main HD crashed and i am trying to install windows and it wont boot from CD. the rev of my board is 1.0 i was running the f7 bios but i went back to f6 just in case it was the bios being flaky. now i have tried two different bioses, two different ide cables and two different dvd rom drives that work in two other machines. and it doesnt show up in bios or let me boot from a cd or dvd where as the same cd on two other rigs worked. any suggestions? i am freaking out cause if i cant intall a os on my main rig it is useless until i can. i am wondering why before my ide dvd rom drive showed up and now its not showing any ide dvd rom drive i pop in.
Try this....

Make sure you have your good OC profiles saved in BIOS or to USB stick, and revert your bios back to factory default settings...

1. Double check your BIOS is set to boot from CD/DVD.
2. Make sure that Onboard SATA/IDE device is enabled.

When the system is booting and your get the message "press any key to boot from CD"... Keep pressing any key! Even though you'll prolly get repeated messages 'No boot device detected'. sometimes even ejecting the dvd tray and putting it straight back in to get the disk spinning helps to detect it for some reason

Dunno why this happens on the UD3's but mine wouldn't detect my Vista install DVD either straight away on a re-install.
__________________
Maximus II Formula & Q9650 @ 4.3GHz

System: Orb
CPU
Q9650 @ 4.2GHz		 Motherboard
ASUS Maximus II Formula (BIOS 2202)		 Memory
8GB OCZ Platinum         (PC2-8500) 5.5.5.15 		Graphics Card
ASUS GTX 295
Hard Drive
60GB OCZ Vertex Turbo 2xSATA II Seagates (2TB)		 Sound Card
Asus Xonar D2X		 Power Supply
Corsair TX 750W		 Case
Antec 1200
CPU cooling
TRUE Black                (Lapped)        		 GPU cooling
STD H/S & Fan		 OS
Windows 7 Ultimate x64 (Fully Tweaked)		 Monitor
26" iiyama ProLite (E2607WS-B1)
orbiter is offline   Reply With Quote
Old 02-08-09   #1585 (permalink)
New to Overclock.net
 
intel ati

Join Date: Jul 2007
Posts: 18

Rep: 1 BiuS Unknown
Unique Rep: 1
Trader Rating: 0
Default
Quote:
Originally Posted by redalert View Post
BiuS raise the cpu pll voltage to 1.57 and raise cpu termination to 1.34 and see what happens
Didn`t work out.
__________________
System: My System
CPU
E8500 4.25Ghz (8.5x500)		 Motherboard
GA-P45-UD3P		 Memory
2x1GB Crucial Ballistix PC2-8500 		Graphics Card
ASUS HD3650
Hard Drive
2x Seagate 500GB 7200.11 RAID0		 Power Supply
CoolerMaster RealPower 520		 Case
Antec Nine Hundred II
CPU cooling
True120+Scythe 110CFM		 OS
Windows 7		 Monitor
Acer 22"
BiuS is offline   Reply With Quote
Old 02-08-09   #1586 (permalink)
4.0 GHz
 
stn0092's Avatar
 
intel nvidia

Join Date: Jun 2008
Location: N. California
Posts: 604

Rep: 41 stn0092 is acknowledged by some
Unique Rep: 36
Trader Rating: 15
Default
Quote:
Originally Posted by BiuS View Post
Didn`t work out.
Leave your RAM timings on auto instead of setting them manually; their rated speeds might not necessarily work with this board. If auto loosens them but the new FSB works, you can tighten them later on after you stabilize. Also, since you're running four sticks instead of two, raise MCH a bit more. Try playing with the MCH reference as well and find out if you need a lower or higher one.
__________________
System: Lancelot - 2008
CPU
Intel Q9550 E0 @ 4.03GHz (475x8.5)		 Motherboard
eVGA 790i FTW SLI		 Memory
2x2GB Corsair XMS3 DDR3 		Graphics Card
2x eVGA Geforce GTX 285 in SLI
Hard Drive
128GB Falcon SSD, 2x1TB Caviar Black		 Sound Card
ASUS Xonar D2		 Power Supply
Corsair HX1000W		 Case
Lian-Li A70B
CPU cooling
HDT-S1283; Ultra Kaze 3000 @ 2200RPM; Tuniq TX-2		 GPU cooling
Stock fan		 OS
Windows 7 Professional x64		 Monitor
24" Samsung 2493HM
stn0092 is offline   Reply With Quote
Old 02-08-09   #1587 (permalink)
Intel Overclocker
 
f16-r1's Avatar
 
intel nvidia

Join Date: Jul 2007
Location: Homer, GA
Posts: 690

Rep: 38 f16-r1 is acknowledged by some
Unique Rep: 33
Trader Rating: 0
Default
its not even detecting ide devices dunno wth is going on? gunna call gigabyte up tomorrow.
tried everything. jumper settings, ide cables, different drives, bios settings, flashing bios, clearing cmos, and to no avail. it will not detect ide devices whatsoever. i took out one of my sata drives popped it in my secondary rig and installed vista to that hard drive then moved it into my main rig and now i have a working os on it but, still no ide devices showing up. weird this board just might be taking a poop i am surprised.

Edit: so i cant play games, install certain programs from discs and such. really starting to piss me off

System: My Baby
CPU
Q9650 @ 4.05ghz 24/7 (450 x 9)		 Motherboard
Gigabyte EP45-UD3P		 Memory
G.Skill 8GBPI 4x2gb 		Graphics Card
EVGA GTX260 core 216
Hard Drive
300GB-VR,2 x 320gb(raid 0), 500gb,750gb, 1tb sata		 Sound Card
X-FI TItanium		 Power Supply
Antec Quattro 1000watt		 Case
Antec 1200
CPU cooling
Apogee GTZ		 GPU cooling
Air		 OS
Xp pro(x86-VM)/Vista Ult(x64) SP1/Win 7 beta/		 Monitor
2 x Samsung 245bw res @ 1920x1200
Last edited by f16-r1 : 02-08-09 at 05:38 PM
f16-r1 is offline   Reply With Quote
Old 02-08-09   #1588 (permalink)
New to Overclock.net
 
jchapman805's Avatar
 
intel nvidia

Join Date: Nov 2008
Location: Santa Maria, Ca
Posts: 42

Rep: 0 jchapman805 Unknown
Unique Rep: 0
Trader Rating: 0
Default
well this is what i got it at with prime95...temps for all 4 cores are at 92 degrees celcius should i lower fsb to cope with heat?

System: Lucky Asses Inc.
CPU
Intel QX6700 @ 3.2Ghz		 Motherboard
Gigabyte EP45 UD3P		 Memory
4GB Kingston Hyper-X 		Graphics Card
Evga 9800GX2 1GB
Hard Drive
150GB WD Raptor 10K		 Sound Card
Sound Blaster X-Fi XtremeMusic		 Power Supply
750w Thermaltake ToughPower		 Case
CoolerMaster Ammo
CPU cooling
Zalman Turbine Cooler		 GPU cooling
Stock Air		 OS
Windows XP		 Monitor
22" Samsung 206BW LCD
jchapman805 is offline   Reply With Quote
Old 02-08-09   #1589 (permalink)
4.0ghz
 
redalert's Avatar
 
intel ati

Join Date: Apr 2008
Location: Philly
Posts: 2,692

Rep: 332 redalert is a proven memberredalert is a proven memberredalert is a proven memberredalert is a proven member
Unique Rep: 268
Trader Rating: 18
Default
jchapman805 use coretemp or real temp and see what they say 92c is very dangerous if those temps are correct. I would adjust your voltages ASAP!!! to be on the safe side
__________________

Q9450 4.0ghz

System: My System
CPU
i7 920 @ 185x21 HT		 Motherboard
Asus P6T		 Memory
6GB Corsair XMS3 DDR3 1600 		Graphics Card
SAPPHIRE 100245L Radeon HD 4850 512MB
Hard Drive
WD 150GB VelocityRaptor		 Sound Card
Asus Xonar D2X		 Power Supply
SILVERSTONE ST70F 700W		 Case
HAF 922
CPU cooling
MegaPrime w/Panaflo		 OS
Win7 64		 Monitor
Samsung 2333SW 23"
redalert is offline Overclocked Account   Reply With Quote
Old 02-08-09   #1590 (permalink)
New to Overclock.net
 
jchapman805's Avatar
 
intel nvidia

Join Date: Nov 2008
Location: Santa Maria, Ca
Posts: 42

Rep: 0 jchapman805 Unknown
Unique Rep: 0
Trader Rating: 0
Default
well i used coretemp and it went to 85c then -41 when it went over 85c...i have my voltages on auto it idles at about 47 degrees c

System: Lucky Asses Inc.
CPU
Intel QX6700 @ 3.2Ghz		 Motherboard
Gigabyte EP45 UD3P		 Memory
4GB Kingston Hyper-X 		Graphics Card
Evga 9800GX2 1GB
Hard Drive
150GB WD Raptor 10K		 Sound Card
Sound Blaster X-Fi XtremeMusic		 Power Supply
750w Thermaltake ToughPower		 Case
CoolerMaster Ammo
CPU cooling
Zalman Turbine Cooler		 GPU cooling
Stock Air		 OS
Windows XP		 Monitor
22" Samsung 206BW LCD
jchapman805 is offline   Reply With Quote
Reply
Page 159 of 794 « First 59109149155156157158 159 160161162163169209259659 Last »

Tags
ep45-ud3p, gigabyte, ud3r

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT -5. The time now is 06:23 AM.

Contact Us - Overclock.net - Archive - Top

Overclock.net is a Carbon Neutral Site Creative Commons License

Terms of Service / Forum Rules | Privacy Policy | DMCA Info | Advertising | Become an Official Vendor
Copyright © 2009 Shogun Interactive Development. Most rights reserved.
Page generated in 0.17885 seconds with 9 queries