|
![]() |
Overclock.net - Overclocking.net > Intel > Intel Motherboards | |
Gigabyte EP45-UD3P Owners Guide
|
||
![]() |
| LinkBack | Thread Tools |
|
|
#11 (permalink) | |||||||||||||
|
The Dark Passenger
![]() |
Quote:
Only $117 in the US for this board. Here it retails in the $190 range (although I got it a fair bit cheaper )
|
|||||||||||||
|
|
|
|
#12 (permalink) | |||||||||||||
|
Windows Wrangler
![]() |
I keep trying and trying but I can't get above 3.4ghz on my Q6600 using my current memory.
I can get it to post at 3.6 but it blue screen at the vista loading screen with my mem volts at 2.1 and vcore at 1.45.
|
|||||||||||||
|
|
|
|
|
#13 (permalink) | ||||||||||||
|
The Dark Passenger
![]() |
only 1.45 vcore i s your issue mate. with my Q6600's (I have had several), I had to go as high as 1.5 in the bios on a couple of them.
__________________Did you enable LLC?
|
||||||||||||
|
|
|
|
#14 (permalink) | ||||||||||||||
|
Windows Wrangler
![]() |
Quote:
Right now at 1.43 vcore on my setup and I idle at 38-38-38-44 with a....fan...blowing into my case XD. If I turn off the fan it they raise to about 44-45-45-51 but at max it doesn't go over 62c on any cores. It's a quite blower fan btw :P so it's quite nice and convenient.
|
||||||||||||||
|
|
|
|
|
#15 (permalink) | ||||||||||||
|
The Dark Passenger
![]() |
What about LLC? Its perfectly safe for the 65nm chips
__________________
|
||||||||||||
|
|
|
|
#16 (permalink) | |||||||||||||
|
Windows Wrangler
![]() |
Well, I got it running on air at 3.6ghz. 1.5vcore was the solution.
What exactly is LLC ? I'm not sure if I have it enabled or not. http://valid.x86-secret.com/show_oc.php?id=450010 My temps are at idle 43-40-42-46
Last edited by mhsbrian : 11-22-08 at 03:25 PM |
|||||||||||||
|
|
|
|
|
#17 (permalink) | ||||||||||||
|
The Dark Passenger
![]() |
loadline calibration. Its in your bios.
__________________turning it on reduces vdroop which means that you will need less vcore under load for stability. it's dangerous with 45nm chips but not the 65nm
|
||||||||||||
|
|
|
|
#18 (permalink) | ||||||||||||||
|
Windows Wrangler
![]() |
Quote:
Okay I have it enabled now, my vcore is still at 1.5v could I try dropping it a little now ? **EDIT*** Running solid at 1.46 with good temps . 40-42-40-46 idling.
Last edited by mhsbrian : 11-22-08 at 04:03 PM |
||||||||||||||
|
|
|
|
|
#19 (permalink) | ||||||||||||
|
The Dark Passenger
![]() |
There you go. thats what LLC is for (at least with the more sturdy chips)
__________________
|
||||||||||||
|
|
|
|
#20 (permalink) | |||||||||||||
|
Windows Wrangler
![]() |
Attached image to post.
|
|||||||||||||
|
|
|