Fletcher Carnaby

I came accross this recently: http://www.legitreviews.com/article/663/1/

If this article is correct, it's possible due to the catalyst drivers. Am curious myself if this varies accross mobos.

Edit: In article they used a Gigabyte X38-DQ6. Not the same model, but promising none the less...

__________________

DraganUS

Thats interesting.

__________________

E1400 100% OC @ 4GHz

angrysasquatch

No, you can crossfire any recent ATI cards, regardless of which cards you're trying to combine.

__________________

Acoma_Andy

This board has an option to dump the bios settings to a .txt file right? Can I find this in the bios or something?

__________________

hifiaudio2

I have tried many settings with this board and am having very little success with overclocking it. I am now on my second board as the first kept bluescreening even with all auto settings, and also with all auto + 2.1v for my memory.

Now this new one is much better, but I still cannot get past 300 x 10 or so... 333 x 10 wont even post. I have tried Deadskulls settings.. wont post either (at 333 instead of his Fsb of course).

My hardware is in my sig... any suggestions? I had this proc and memory clocked at 350 x10 on my Nvidia 680i MB with no problems.....

go4life

*sad panda*

IE makes me cry
Firefox is quite popular, and is faster, more secure, and don't ruin your pc!

I like to call it Internet Exploder (because of the boom of viruses hehe)

Once you get used to Firefox you wont go back to IE

__________________

redalert

maybe your hitting a fsb wall or you just need to up vcore or nb voltage. maybe try using a 9 multi 375x9 or 400x9 and see if you have better luck

__________________

repo_man

Try a higher fsb and lower multi, like 428x7 or something, 400x8. Might be a fsb wall.

__________________



Current Projects --Sanguineus Cinis Cineris
Completed Build Log's -- Hinges for Syrillian's Silentium // Project: Phoenix // Flip this Tower

steel_st

Me too...I still use IE out of habit. Congrats on your first overclock...I'm still trying to get my first overclock on my q6600 at 3.2 (B3, no G0 ) but i can't get it stable I run prime95 and after a few hours boom - one of those blasted workers stop running. Hadn't figured out my problem and since I'm a newbie to overclocking it's taking longer than I'd like to find the problem. I do have LLC enabled though; others on this thread have told me it's good for 65nm processors.

{Artem}

Started all over again to overclock my CPU! now i'm at 3,44Ghz with 333Mhz srtap and 2,4B multiplier! My vCore is at 1,3 in the BIOS (1,28 CPU-Z) with LLC enabled(it helped me to get lower vCore, before i needed 1,34)! Using Vista x64 i managed to get 71C on one of my cores during 10 times IntelBurn Test run! Should i move forward in overclocking? I think i can hit 3,6Ghz! What is the maximum vCore i can set with LLC enabled? i will install second Noctua fan for my CPU cooler, hope it'll help to get some lower temp! Do any of you, guys, tried Thermalright HR-05 IFX/SLI NB heatsink for your chipset? looking forward to mount that thing too)