Jesherie

VID is 1.325, and I don't know if it's G0 or B3.

__________________

freakb18c1

download core temp look at the revison youll see it there sounds like you have a G0 on that vid

Jesherie

Yep, it's a G0. Should I update my BIOS?

__________________

freakb18c1

no keep it the way it is

Here is the template: this is 3.2ghz settings Below stock voltage stable

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8x
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................:3.2 ghz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400Mhz
PCI Express Frequency (Mhz) .........:100

C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<<100
MCH Clock Skew (ps)...................: <<< 200


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 400mhz
System Memory Multiplier ..............: 2.66D
Memory Frequency (Mhz) ..............: 1066
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................15


Advanced Timing Control
tRRD...........................................4
tWTR..........................................5
tWR............................................5
tRFC...........................................57
tRTP...........................................4
Command Rate (CMD) ....................:2

Driving Strength Profiles
Driving Strength ............................1066

Channel A
Static tRead Value.........................9
tRD Phase0 Adjustment...................:Auto <<< Left for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Channel B
Static tRead Value.........................9
tRD Phase0 Adjustment...................:Auto <<< Left for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................: 1.275
CPU Termination…..... 1.200V*.......:Normal<< If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking

CPU PLL…………………....1.500V*.......:Normal<< If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking

CPU Referen.…………....0.755V*.......:Auto <<< .64% Of Vtt (Termination above) Auto Will set this correctly

CPU Reference2………,,0.800V*.......:N/A<<< .67% Of Vtt (Termination above) Auto Will set this correctly

MCH/ICH
MCH Core…………….....1.100V...........:Normal <<
MCH Reference….…….0.800V...........;Auto <<< Leave
MCH/DRAM Ref.…......0.900V...........:Auto <<< Leave
ICH I/O……………….....1.500V............:Auto <<< Leave
ICH Core…………...……1.100V............:Auto <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 1.900v
DRAM Termination .…0.900V............: <<< Left at auto
Channel A Reference 0.900V............: <<< "
Channel B Reference 0.900V............: <<< "

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................:Enabled

Integrated Peripherals
Legacy USB Storage Detect ..............enabled

ZeneticX

hi all im new here.juz found out bout this great thread in this forum bout ep45-ud3p overclocking.since the thread already spands 266 pages,im a bit lazy to ran through the whole thing so i jz ask my ques here.

currently i have a e8400 eo stepping.i would like to run 520fsbx8 to get 4.1ghz.any users with similar set up whats ur vcore?thks for sharing

NoGuru

Ok here is my settings but 520 is not that easy to do. Fill is your system specs so we can help.

Attached Thumbnails

 

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi

ZeneticX

alright here it is

Proc : C2D E8400 E0 4.1ghz (520x8) currently using 1.356v on vcore but it still fail orthos
Ram : Corsair Dominator 8500 C5DF 4gb 1066mhz kit (running on 1040mhz 1:1 ratio)
Mobo : Gigabyte ep45-ud3p (duh)
Gc : Zotac GTX260 AMP2
PSU : Gigabyte Odin Pro 800w

ure running 515x8 on 1.268v?i cant even boot on tht voltage lol

NoGuru

lol yes but I got lucky so very nice overclock by the way. Have you tried bumping your NB a little? And up in the top left corner of the page click quick links or user cp and edit system.

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi

ZeneticX

NB u mean MCH core?

NoGuru

yep and hows your temps look? just noticed 4G of ram on 32 os are the 2x2G or 4x1G

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi