Gigabyte EP45-UD3P Owners Guide - Page 416 - Overclock.net

vaatem12 · 07-16-09

i tried all voltages bro.. all the way up to 1.5v and mch and **** up to 1.4v... but i tested it out and left fsb at 471 and dropped multi to 6.0 which would only be 2.8ghz and p95 errored..so my chip cant stabilize 471 fsb even if its only at 2.8

xguntherc · 07-16-09

how do a raise the NB voltage on this board. im new to the ep45.

i just want to give it a little extra as i am running 8GB 1066 MHz ram on the build i just finished for my friend. like i said. he wont be overclocking. so do i even need a voltage increase simply for 8GB running stock. i want to add a little just to ensure stability.

thanks!

NoGuru · 07-16-09

Quote:

Originally Posted by xguntherc

how do a raise the NB voltage on this board. im new to the ep45.

i just want to give it a little extra as i am running 8GB 1066 MHz ram on the build i just finished for my friend. like i said. he wont be overclocking. so do i even need a voltage increase simply for 8GB running stock. i want to add a little just to ensure stability.

thanks!

MCH is NB just 1 bump should do. Oh and manually set volts and timings for the ram.

richardbb85 · 07-16-09

Quote:

Originally Posted by dennyb

Have you adjusted the V-core so that it will read 1.36 or so in CPUZ (load)? Do that- set CPU Term to 1.34v and MCH Core to 1.32xvolts and try small ffts

i m gona set cpu term to 1.34v and mch core to 1.32v and run 3.9ghz

brb in like 2 mins

nm, no go. hahahah

vaatem12 · 07-16-09

so noone has any ideas or solutions on why i cant run 465fsb+ stable? even if the multi is at 6.0 which is stock at 2.8ghz, basically right now my fsb according to p95 isnt stable past 465 even when multi is only at 6.0... could it BE my 550w bad branded logisys psu? theres got to be a reason why my specific setup cant stabilize from 465fsb and up.. i can run 3.9ghz stable..464fsb is stable, but 465 and up is not even if itso nly at 2.8ghz w/ 6.0multiplier, theres got to be a reason why. all my friends with ep45 ud3p / q9550 can stabilize up to like 480 fsb and higher. which is like 4.1ghz ++ but they have alot better psu's is the only thing i can think of...Ideas anyone? I got to figure this out before i flipppp out! arghh mateyy!

richardbb85 · 07-16-09

i wish i could help u, lol

NoGuru · 07-16-09

vaatem12 take the template in my sig copy and paste it and fill in what you have stable right now. Then post them.

dennyb · 07-16-09

Quote:

Originally Posted by vaatem12

so noone has any ideas or solutions on why i cant run 465fsb+ stable? even if the multi is at 6.0 which is stock at 2.8ghz, basically right now my fsb according to p95 isnt stable past 465 even when multi is only at 6.0... could it BE my 550w bad branded logisys psu? theres got to be a reason why my specific setup cant stabilize from 465fsb and up.. i can run 3.9ghz stable..464fsb is stable, but 465 and up is not even if itso nly at 2.8ghz w/ 6.0multiplier, theres got to be a reason why. all my friends with ep45 ud3p / q9550 can stabilize up to like 480 fsb and higher. which is like 4.1ghz ++ but they have alot better psu's is the only thing i can think of...Ideas anyone? I got to figure this out before i flipppp out! arghh mateyy!

try 7x and other multis you never know what might work. sometimes a jump in speed is just the ticket ,other times the reverse will work. And sadly sometimes nothing will work

edit: sometimes too much voltage will be hurtful. Maybe drop the term to 1.28? It is up to you to find the right combination. I am quite certain that the board will do 500FSB with the "right" voltage

supaspoon · 07-16-09

Quote:

Originally Posted by vaatem12

so noone has any ideas or solutions on why i cant run 465fsb+ stable? even if the multi is at 6.0 which is stock at 2.8ghz, basically right now my fsb according to p95 isnt stable past 465 even when multi is only at 6.0... could it BE my 550w bad branded logisys psu? theres got to be a reason why my specific setup cant stabilize from 465fsb and up.. i can run 3.9ghz stable..464fsb is stable, but 465 and up is not even if itso nly at 2.8ghz w/ 6.0multiplier, theres got to be a reason why. all my friends with ep45 ud3p / q9550 can stabilize up to like 480 fsb and higher. which is like 4.1ghz ++ but they have alot better psu's is the only thing i can think of...Ideas anyone? I got to figure this out before i flipppp out! arghh mateyy!

mch core/mch ref/memory timings &/or voltages/mch-dram ref volts/mem channel refs.

dennyb · 07-16-09

Quote:

Originally Posted by supaspoon

mch core/mch ref/memory timings &/or voltages/mch-dram ref volts/mem channel refs.

^^^^^ this is what I will work on when I get "hoover" and his antec step brothers back in action

		Overclock.net - Overclocking.net > Intel > Intel Motherboards
Gigabyte EP45-UD3P Owners Guide

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)