dennyb

Hey AC, I mean Cheers. Ya I'm wanting to get a stable 4.25 and yes I will post it in the 4.0 club if they make an additional section . Meaning I don't want to replace my bogus 4.5 for a real 4.25. Do you know how long one needs to run prime for a star? I really like stars.

Are you enjoying the new 9650?

__________________

ACHILEE5

Yo bud
I don't know how long sdla4ever wants tested with Prime95, but the other thread for overclocks wanted 4 hours

And am i enjoying the chip, "it's best thing since sliced bread"
And really is, Twice the chip the E8500 was!
And to think i nearly used the money to buy a new Case
She's a beast
Now i just need to hook it up to a Holodeck, and I'll be gone for years

dennyb

I had to google "holodeck". we don't have holodecks in my holler
Glad your getting along well with the chip
I'm 4 hrs in and counting on my 4.25- going to get a screenie along with the other requirements in just a moment. I think I will let it run all night and see if I can get a 12 hr screenshot tomorrow morning---cheers mate

__________________

ACHILEE5

I'm thinking of building a nice Fish Pond in my garden.
Then i will go water cooled, and have the rad in the pond with a pump pushing water through my rad!
And if it works out like i expect, i can have nice cool temps. And Tropical Fish in my pond

I just hope i goes better than when i had a Siamese Fighting Fish heated by my Wireless Router.
The temps were spot on, but the radiation killed the fish

NoGuru

Way to go AC

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi

E8400 @ 4.93 GHz on Air

crashdummy35

That's a cool little fish, AC.

OMG! You were serious the radiation killed the fish?

I'm sorry bro. I thought that was a recent pict of the little guy.

__________________

Gigabyte UD3P/UD3R Owner's Thread

The Little Card That Could...

ACHILEE5

The fish was called 7 of 1, he was just like the Windows 7 wallpaper fish

As i said the temps were spot on
And even his light was USB, I was so pleased with my PC powered Fish Tank
But i didn't take into account the radiation

crashdummy35 it was sweet, but it all went soo wrong

pdawg17

Hey guys...I have the cheaper UD3LR (no heat pipes) but have also noticed that for some reason it does not have all of the "overclock tweaking" options that the UD3P/R have (see below)...it's too late to take it back btw so instead I'm looking for some advice on how to get up to 4.0GHz with my Q9550 E0 (VID 1.25V)...

I am Linx 20-run stable at 3.92GHz with the settings below but if I even bump it to 3.94GHz it fails Linx at the end of pass 2 (with red error bar)...bumping vcore does not help (even kicking it up to 1.38V bios)...is there anything else I can try or do you think it is due to not having as many/detailed options in the bios? Btw temps are fine as it fails even with fan on NB or with case open...

If it helps, small fft passes for hours at 4.0GHz with 1.3725V (bios)...it's the large fft that fails - and usually by test #2 so it happens very quickly...

Q9550 E0
Corsair PC8500 2x2GB


MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8.0
Fine CPU Clock Ratio.....................: +0.5
CPU Frequency ...........................: 4.00GHz (471x8.5)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: [471]
PCI Express Frequency (Mhz) .........: [100]

C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [400MHz]
System Memory Multiplier ..............: [2.00D]
Memory Frequency (Mhz) ..............: [942]
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................[5]
tRCD .........................................[5]
tRP'...........................................[5]
tRAS..........................................[18]

Advanced Timing Control
tRRD...........................................[4]
tWTR..........................................[4]
tWR............................................[8]
tRFC...........................................[68]
tRTP...........................................[4]
Command Rate (CMD) ....................:[2]

Channel A
Static tRead Value.........................:[9]
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Channel B
Static tRead Value.........................:[9]
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Voltage Type.………... Manual
LLC............................................:[Disabled]
CPU Vcore….……….........................:[1.35625]

CPU Termination…..... [1.32]

CPU PLL…………………....[1.55] (default for my board)

CPU Reference.…………....[.838]

CPU Reference2………Not available on my board

MCH Core…………….....[1.32]
MCH Reference….…….[.835]
MCH/DRAM Ref.…......Not available
ICH I/O……………….....[1.500]
ICH Core…………...……[1.100]

DRAM Voltage ……....[2.100]
DRAM Termination .…Not available
Channel A Reference.....Not available
Channel B Reference....Not available

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]

NoGuru

pdawg17 your cpu term is to low. Try 1.33

__________________

Join Overclock.nets
HWbot team here!

9.770 super pi

E8400 @ 4.93 GHz on Air

crashdummy35

#1 What are your temps..? What are you using to measure them?

#2 Go to User CP>Edit System and fill in your specs please. It will make it a lot easier if everyone can see what hardware you have and what tweaks you may need to make.

#3 What is your vcore showing in CPU-Z? Both idle and under load.

Edit: Nice avatar NoGuru...wow.

__________________

Gigabyte UD3P/UD3R Owner's Thread

The Little Card That Could...