Gigabyte EP45-UD3P Owners Guide - Page 551 - Overclock.net

grishkathefool · 08-10-09

Quote:

Originally Posted by sdla4ever

i see the logic, but what would be causing the BIOS to not update and not POST? could it be CPU related?

I missed something, did you brick your Mobo doing a BIOS upgrade?

richardbb85 · 08-10-09

anyone using a fan controller here?

i bought 2 already from micro center, both arent working at all.

got the rheobus extreme n regular

grishkathefool · 08-10-09

dennyb is...

dennyb · 08-10-09

Quote:

Originally Posted by richardbb85

anyone using a fan controller here?

i bought 2 already from micro center, both arent working at all.

got the rheobus extreme n regular

Ya, I had a R extreme and it burnt up. I am running this now and I like it fine.

http://www.performance-pcs.com/catal...ducts_id=24896

richardbb85 · 08-10-09

Quote:

Originally Posted by dennyb

Ya, I had a R extreme and it burnt up. I am running this now and I like it fine.

http://www.performance-pcs.com/catal...ducts_id=24896

i hate how micro center don't stock these two controllers, they carry only one at a time. ***bbq

now i can't even go in and exchange it for a different one

toricred · 08-10-09

I'm hoping you guys can help me. I am running a UD3P with an E0 Q9550. I just ran IBT and saw something really weird. In HWMonitor the CPU temp maxed out at 79, but the cores all stayed below 67. I thought the cores were always higher than the CPU temp. Any idea what might be wrong?

By the way I currently have it OC'd to 3.825 and am waiting on a better fan for my DK. I know that the cores stick when at idle (the lowest they go is 38, 34, 34, 32).

Ridingagain · 08-10-09

I just got this board and seems to be working well. I'm using gskill f2-8500cl5d-4gbpi and only thing i changed was performance to standard and increased dram voltage to 2.0v. Memory is in slot 2 &4 and worked fine. I then tried to move memory to slot 1 & 3 and it wouldn't load windows. Then tried both memory sticks individually in slot 1 and they were fine. Something is wrong with slot 3. Is it possible slot 1&3 would require different bios adjustments than what needed when I use slot 2&4? cpu is qx9770 and using win7.

dennyb · 08-10-09

Quote:

Originally Posted by Ridingagain

I just got this board and seems to be working well. I'm using gskill f2-8500cl5d-4gbpi and only thing i changed was performance to standard and increased dram voltage to 2.0v. Memory is in slot 2 &4 and worked fine. I then tried to move memory to slot 1 & 3 and it wouldn't load windows. Then tried both memory sticks individually in slot 1 and they were fine. Something is wrong with slot 3. Is it possible slot 1&3 would require different bios adjustments than what needed when I use slot 2&4? cpu is qx9770 and using win7.

If I am understanding you correctly all of the ram works in every slot but #3? If that is correct then #3 dimm is dead

NoGuru · 08-10-09

Quote:

Originally Posted by toricred

I'm hoping you guys can help me. I am running a UD3P with an E0 Q9550. I just ran IBT and saw something really weird. In HWMonitor the CPU temp maxed out at 79, but the cores all stayed below 67. I thought the cores were always higher than the CPU temp. Any idea what might be wrong?

By the way I currently have it OC'd to 3.825 and am waiting on a better fan for my DK. I know that the cores stick when at idle (the lowest they go is 38, 34, 34, 32).

Try using real temp.

toricred · 08-10-09

Doesn't Real Temp only show core temps? Should I just not worry about what is showing in HWMonitor as "CPU"?

		Overclock.net - Overclocking.net > Intel > Intel Motherboards
Gigabyte EP45-UD3P Owners Guide

Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)