Overclock.net - Overclocking.net
     
 
Home Gallery Reviews Blogs Register Today's Posts Mark Forums Read Members List


Go Back   Overclock.net - Overclocking.net > Intel > Intel Motherboards
Reload this Page Gigabyte EP45-UD3P Owners Guide

Reply
Page 769 of 790 « First 269669719759765766767768 769 770771772773779 Last »
 
LinkBack Thread Tools
Old 2 Weeks Ago   #7681 (permalink)
PC Gamer
 
XtremeCuztoms's Avatar
 
intel nvidia

Join Date: Oct 2009
Location: F.Hills, MI
Posts: 42

Rep: 4 XtremeCuztoms Unknown
Unique Rep: 2
Trader Rating: 0
Default
Quote:
Originally Posted by dennyb View Post
When you load Optimal Defaults the USB devices will not work until you go into the BIOS ( Int Peripherals) and enable all of them. Always perform CMOS reset and Load Op Def in this way

CLEAR CMOS
Shut down--unplug-- hold start button in for 10 sec--short the CMOS pins in lower right corner of mobo for 1 minute using a flat screwdriver--plug back in-start--

Load Optimum Defaults--Set PCIe to 100--Set ram timings-- setDRAM voltage--go to Integrated Peripherals-enable all USB settings(they are at the bottom of the page)--go to Advanced BIOS Features,init display-select PEG
Also the boot order will need attention
ok so far so good. did as stated above and was able to boot with razer KB and mouse hooked up on I/O. didn't try 3 external drives or USB hub with printer and Gamecom777's attached yet but will try next boot. thanks for the help and look forward to OC'ing this E6750 and this board.
__________________

System: My GiGaByte
CPU
E6750		 Motherboard
EP45-UD3P Rev1.6 Bios FB		 Memory
4GB Kingston KHX6400D2LL 		Graphics Card
EVGA 8800GTS 640MB
Hard Drive
WD 640 Blue		 Sound Card
Onboard		 Power Supply
Seasonic M12 700		 Case
CM690 Nvidia Modded
CPU cooling
Ultra 120 eXtreme Lapped		 GPU cooling
Accelero Xtreme 8800		 OS
Vista x64 Ultimate		 Monitor
Hanns-G HW191D
XtremeCuztoms is offline   Reply With Quote
Old 2 Weeks Ago   #7682 (permalink)
Mobo Master
 
NoGuru's Avatar
 
intel nvidia

Join Date: Jan 2009
Location: Lake Orion MI.
Posts: 2,361

Rep: 216 NoGuru is acknowledged by manyNoGuru is acknowledged by manyNoGuru is acknowledged by many
Unique Rep: 116
Trader Rating: 0
Default
Quote:
Originally Posted by XtremeCuztoms View Post
ok so far so good. did as stated above and was able to boot with razer KB and mouse hooked up on I/O. didn't try 3 external drives or USB hub with printer and Gamecom777's attached yet but will try next boot. thanks for the help and look forward to OC'ing this E6750 and this board.
I believe that chip is 2.66 stock. What is the goal?
I say you can hit 4 if temps allow.
__________________

Without question the greatest invention in the history of mankind is beer. Oh, I grant you the wheel was also a fine invention, but a wheel does not go as well with pizza.


Join Overclock.nets
HWbot team here!

9.770 super pi


E8400 @ 4.93 GHz on Air

System: My Foot Rest
CPU
E8400EO@4.5@1.36		 Motherboard
GA-EP45-UD3P F10e		 Memory
4G G.SKILL 1066/F2's 		Graphics Card
Zotac 9600 GT
Hard Drive
320G+80G		 Sound Card
Creative Live		 Power Supply
600W MSI turbo=1.21jigawatts		 Case
Ultra Gladiator
CPU cooling
XIGMATEX HDT S1283, NB Extreme Spirit II		 GPU cooling
Big Zalman		 OS
Windows XP Black/Windows 7 RC		 Monitor
Samsung 930B
NoGuru is offline   Reply With Quote
Old 2 Weeks Ago   #7683 (permalink)
^:cool:^
 
repo_man's Avatar
 
intel nvidia

Join Date: Dec 2007
Location: Alabama
Posts: 6,799

Folding Team Rank: 114
Hardware Reviews: 2
Trader Rating: 36
Default
Quote:
Originally Posted by NoGuru View Post
I believe that chip is 2.66 stock. What is the goal?
I say you can hit 4 if temps allow.
2.66 is stock. I have went to 4.1 on my 6750, with 4ghz stable. Good luck! I used NG's list for his e8400, raised the vcore adn ref's a bit and was stable. Go with his and tweak it!
__________________
OCN's MOTM contest
Brass Bottom Boys GPU Team


Case Mod Comp '09 Intermediate Winner:

Chlokwork Orange - FOR SALE THREAD [case & hardware]



Current Projects --Sanguineus Cinis Cineris
Completed Build Log's -- Hinges for Syrillian's Silentium // Project: Phoenix // Flip this Tower

System: Clockwork Orange
CPU
e6750,lapped @ 3.8ghz (475x8)		 Motherboard
Gigabyte EP45-UD3R		 Memory
2x 2GB G.Skill-1066mhz 		Graphics Card
XFX 260-216 Core Edition - 24/7 folder
Hard Drive
300gb SATA Maxtor		 Sound Card
onboard		 Power Supply
Corsair TX750w		 Case
Antec 300 + cable management
CPU cooling
Xiggy S1283 Lapped+bolt kit/Extreme Spirit 2 on NB		 GPU cooling
Accelero Xtreme GTX 280		 OS
Windows 7		 Monitor
19" Samsung 932bw
Overclock.net - 2009 Chimp Challenge Champions 1 Million+ Folding at Home points Overclock.net Mod of the Month
repo_man is offline I fold for Overclock.net Overclocked Account   Reply With Quote
Old 2 Weeks Ago   #7684 (permalink)
PC Gamer
 
XtremeCuztoms's Avatar
 
intel nvidia

Join Date: Oct 2009
Location: F.Hills, MI
Posts: 42

Rep: 4 XtremeCuztoms Unknown
Unique Rep: 2
Trader Rating: 0
Default
Quote:
Originally Posted by NoGuru View Post
I believe that chip is 2.66 stock. What is the goal?
I say you can hit 4 if temps allow.
I'd be happy with 4 i think, not sure my memory will help or hinder me or not. and yes 2.66 is stock
__________________

System: My GiGaByte
CPU
E6750		 Motherboard
EP45-UD3P Rev1.6 Bios FB		 Memory
4GB Kingston KHX6400D2LL 		Graphics Card
EVGA 8800GTS 640MB
Hard Drive
WD 640 Blue		 Sound Card
Onboard		 Power Supply
Seasonic M12 700		 Case
CM690 Nvidia Modded
CPU cooling
Ultra 120 eXtreme Lapped		 GPU cooling
Accelero Xtreme 8800		 OS
Vista x64 Ultimate		 Monitor
Hanns-G HW191D
XtremeCuztoms is offline   Reply With Quote
Old 2 Weeks Ago   #7685 (permalink)
Mobo Master
 
NoGuru's Avatar
 
intel nvidia

Join Date: Jan 2009
Location: Lake Orion MI.
Posts: 2,361

Rep: 216 NoGuru is acknowledged by manyNoGuru is acknowledged by manyNoGuru is acknowledged by many
Unique Rep: 116
Trader Rating: 0
Default
Quote:
Originally Posted by XtremeCuztoms View Post
I'd be happy with 4 i think, not sure my memory will help or hinder me or not. and yes 2.66 is stock
The ram may hinder you a little, but I think we can still get a nice OC out of it.
Have you ever OC your ram?
__________________

Without question the greatest invention in the history of mankind is beer. Oh, I grant you the wheel was also a fine invention, but a wheel does not go as well with pizza.


Join Overclock.nets
HWbot team here!

9.770 super pi


E8400 @ 4.93 GHz on Air

System: My Foot Rest
CPU
E8400EO@4.5@1.36		 Motherboard
GA-EP45-UD3P F10e		 Memory
4G G.SKILL 1066/F2's 		Graphics Card
Zotac 9600 GT
Hard Drive
320G+80G		 Sound Card
Creative Live		 Power Supply
600W MSI turbo=1.21jigawatts		 Case
Ultra Gladiator
CPU cooling
XIGMATEX HDT S1283, NB Extreme Spirit II		 GPU cooling
Big Zalman		 OS
Windows XP Black/Windows 7 RC		 Monitor
Samsung 930B
NoGuru is offline   Reply With Quote
Old 2 Weeks Ago   #7686 (permalink)
New to Overclock.net
 
intel nvidia

Join Date: Oct 2009
Posts: 24

Rep: 2 radioman81 Unknown
Unique Rep: 2
Trader Rating: 0
Default
Thank you all for your OC help.

I stablized my 1.3 VID at 4.2 GHz with the following volts....

CPU Vcore 1.47V
DDR 2.18 V

Temps Min 39
Temps Max 73

So far, I am happy. I need the MHz for FSX...other then that I would be running at 1.37Vcore and DDR 1.85Volts at 4GHz. But FSX is a CPU eater ))
__________________
System: My System
CPU
Q9650		 Motherboard
Gigabyte - UD3P		 Memory
OCZ Blade Low Voltage Kit 4GB 9600U (OCZ2B1200LV4G 		Graphics Card
MSI 250 GTS
Hard Drive
Samsung SP		 Sound Card
Onboard		 Power Supply
BeQuiet Dark Power 550W		 Case
Cooler Master CM Stacker
CPU cooling
Prolimatech Megahalems 2 Fans (Push - Pull)		 GPU cooling
Stock (Twin Fans)		 OS
Windows 7 64 Bit		 Monitor
Samsung Sync Master 226BW
radioman81 is offline   Reply With Quote
Old 2 Weeks Ago   #7687 (permalink)
PC Gamer
 
Dilyn's Avatar
 
intel nvidia

Join Date: Apr 2009
Location: Byron Center, MI
Posts: 1,047

Rep: 76 Dilyn is acknowledged by some
Unique Rep: 54
Trader Rating: 2
Default
So if I were to raise my FSB and lower the multi, would I need to loosen my RAM timings? Currently the FSB is like, 379x9 and I want more. RAM timings are 5-5-5-15 stock, 5-5-5-18 to reach stable OC.
__________________
Quote:
Originally Posted by DevilGear44
OMG I LIEK TEH GURLZ AN DER BOOBEES!1!!
Quote:
Originally Posted by GodofGrunts View Post
Ah masturbation, the only thing that prevents every single man from going on a muderous rampage.
Well, that and GTA.

System: To everywun from Dilyn :D
CPU
Core 2 Duo E7300 Wolfdale @ 2.66 Ghz		 Motherboard
Gigabyte GA-EP45-UD3R rev. 1.1		 Memory
2GB DDR2 (2x 1gb G.SKILL) - Dual channel 		Graphics Card
EVGA GeForce 9800 GT 512mb DDR3
Hard Drive
Western Digital Caviar Black 500GB SATA drive		 Sound Card
Built in		 Power Supply
Corsair TX750W		 Case
MODDED Rosewill R604-P SL ATX mid tower
CPU cooling
Arctic Freezer 7 Pro		 GPU cooling
Stock		 OS
Windows 7 (7100), Ubuntu 9.04, Open SuSE		 Monitor
2x eMachines 17" LCD
Dilyn is offline   Reply With Quote
Old 2 Weeks Ago   #7688 (permalink)
Intel Overclocker
 
dennyb's Avatar
 
intel ati

Join Date: Apr 2009
Location: Louisville, Ky.
Posts: 1,990

Rep: 268 dennyb is a proven memberdennyb is a proven memberdennyb is a proven member
Unique Rep: 142
Trader Rating: 0
Default
Quote:
Originally Posted by Dilyn View Post
So if I were to raise my FSB and lower the multi, would I need to loosen my RAM timings? Currently the FSB is like, 379x9 and I want more. RAM timings are 5-5-5-15 stock, 5-5-5-18 to reach stable OC.
No sir , 379 FSB is not anywhere close to being a problem for your RAM . I don't know the speed of your RAM,but even 800 MHz Ram can easily run 400MHz FSB with a 2.00 multi. I suspect your Ram is faster than that.

System: GIGABYTE GOODNESS
CPU
Q9650@4.0Ghz. 1.30625/1.25vid		 Motherboard
GA-EP45-UD3P/F10b		 Memory
G.Skill/2x2Gb.BLACK PII/8500 		Graphics Card
Sapphire 4830/1GB DDR3-700/1175
Hard Drive
Seagate 250Gb/7200		 Sound Card
onboard		 Power Supply
Corsair 620-HX		 Case
Antec 900
CPU cooling
Xigmatek Dark Knight/Delta/Lamptron FC-2		 OS
Vista 64 bit		 Monitor
Samsung2433BW
dennyb is offline   Reply With Quote
Old 2 Weeks Ago   #7689 (permalink)
PC Gamer
 
Dilyn's Avatar
 
intel nvidia

Join Date: Apr 2009
Location: Byron Center, MI
Posts: 1,047

Rep: 76 Dilyn is acknowledged by some
Unique Rep: 54
Trader Rating: 2
Default
I believe it's DDR2 800 MHz.
Lemme go check

*searches NewEgg for my RAM*


Alright so I'm pretty sure that this is the stuff that I picked up.

Although I'm getting some new RAM for Christmas. What would I need to do for this stuff?
__________________
Quote:
Originally Posted by DevilGear44
OMG I LIEK TEH GURLZ AN DER BOOBEES!1!!
Quote:
Originally Posted by GodofGrunts View Post
Ah masturbation, the only thing that prevents every single man from going on a muderous rampage.
Well, that and GTA.

System: To everywun from Dilyn :D
CPU
Core 2 Duo E7300 Wolfdale @ 2.66 Ghz		 Motherboard
Gigabyte GA-EP45-UD3R rev. 1.1		 Memory
2GB DDR2 (2x 1gb G.SKILL) - Dual channel 		Graphics Card
EVGA GeForce 9800 GT 512mb DDR3
Hard Drive
Western Digital Caviar Black 500GB SATA drive		 Sound Card
Built in		 Power Supply
Corsair TX750W		 Case
MODDED Rosewill R604-P SL ATX mid tower
CPU cooling
Arctic Freezer 7 Pro		 GPU cooling
Stock		 OS
Windows 7 (7100), Ubuntu 9.04, Open SuSE		 Monitor
2x eMachines 17" LCD
Last edited by Dilyn : 2 Weeks Ago at 06:59 PM
Dilyn is offline   Reply With Quote
Old 2 Weeks Ago   #7690 (permalink)
Mobo Master
 
NoGuru's Avatar
 
intel nvidia

Join Date: Jan 2009
Location: Lake Orion MI.
Posts: 2,361

Rep: 216 NoGuru is acknowledged by manyNoGuru is acknowledged by manyNoGuru is acknowledged by many
Unique Rep: 116
Trader Rating: 0
Default
Quote:
Originally Posted by Dilyn View Post
So if I were to raise my FSB and lower the multi, would I need to loosen my RAM timings? Currently the FSB is like, 379x9 and I want more. RAM timings are 5-5-5-15 stock, 5-5-5-18 to reach stable OC.
Sometimes but not always.

If your going for very high clocks is when loosen timings can help.
But going for a 24/7 stable OC most of the time your timings can stay at stock.
__________________

Without question the greatest invention in the history of mankind is beer. Oh, I grant you the wheel was also a fine invention, but a wheel does not go as well with pizza.


Join Overclock.nets
HWbot team here!

9.770 super pi


E8400 @ 4.93 GHz on Air

System: My Foot Rest
CPU
E8400EO@4.5@1.36		 Motherboard
GA-EP45-UD3P F10e		 Memory
4G G.SKILL 1066/F2's 		Graphics Card
Zotac 9600 GT
Hard Drive
320G+80G		 Sound Card
Creative Live		 Power Supply
600W MSI turbo=1.21jigawatts		 Case
Ultra Gladiator
CPU cooling
XIGMATEX HDT S1283, NB Extreme Spirit II		 GPU cooling
Big Zalman		 OS
Windows XP Black/Windows 7 RC		 Monitor
Samsung 930B
NoGuru is offline   Reply With Quote
Reply
Page 769 of 790 « First 269669719759765766767768 769 770771772773779 Last »

Tags
ep45-ud3p, gigabyte, ud3r

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT -5. The time now is 03:28 AM.

Contact Us - Overclock.net - Archive - Top

Overclock.net is a Carbon Neutral Site Creative Commons License

Terms of Service / Forum Rules | Privacy Policy | DMCA Info | Advertising | Become an Official Vendor
Copyright © 2009 Shogun Interactive Development. Most rights reserved.
Page generated in 0.18171 seconds with 9 queries