dude_472

First timer here -
Started With: Disabled EIST and C1E

Here is where I am stable (only 15 min OCCT load test so far):

• Clock speed from 266 -> 330
• Multiplier to 9
• DRAM at 792 (333/800)
• CPU and NB Voltage at stock (1.29 and 1.33)

OCCT Load
24% overclocked to 2970MHz
Temps: 62 62 60 59 Chipset: 56

I did get an "Error Detected on core #-1" but this is a bug in OCCT according to their forum (it would have said #1, not #-1, if there was a true error).


Clocked to 333 without voltage adjustments dram at 800 - It booted, but during OCCT load, I tried opening smart guardian and windows froze (cleared cmos)

At some point in trying some increases:
Increasing CPU from 1.29 to 1.39V and NB from 1.33 to 1.41 at speeds of 360 and 380 (DRAM at 800 or less), but getting blue screen and page faults when starting load test in OCCT - idle is fine, and temps were around 62-65 on cores, 56 on NB.

Some questions:

• What voltage and temp is safe to increase on NB?
• In going from 330 to 333 with stock Voltage I get a stability issues (OCCT was testing fine under load until I opened smart guardian)? Maybe a fluke (see description above)?
• I would like to get to 400/3600 at least - should I be able without changing RAM speed?
• What should I try next

Specs are below...Let me know if screensshots from OCCT results would help.

Thanks for any help or ideas.

Attached Thumbnails

   

microman

NB voltage shouldnt need to go up till you get to about a 400FSB but you can o as high as 1.6v for benching and 1.525ish for 24/7. 400 fsb is 800 on the ram so thats perfect. try more voltage on the CPU

__________________

TheCh3F

This thread will supply a great amount of information.

DFI Lanparty DK P35-T2RS Thread

__________________

[CPU Loop: HK 3.0 :: GTX360 :: H1011's :: 655v -- Bartx DiCE/LN2]
[Q6600 G0 4.1GHz] :: [i7 920 C0 4GHz] :: [955 BE C2 4GHz] :: [i7 920 D0 5GHz HT ON] :: [i7 920 D0 5.1GHz HT OFF]

Infinitegrim

definetly put a fan on the NB, and you can bump it up. I've bumped mine up to 1.4 no problems. But when i had two sticks of ram, i didnt need to raise the NB even when i was running 500FSB

__________________
My 6800PPD Folding Rig!
WE ARE.......PENN STATE!
This is why i am broke, and use cheap stuff in my PC.