utnorris

I may have to track that one down to see how it does under phase with the PCIe mod in place.
Thanks.

__________________
CPUID http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=484051
Check out the DO stepping - http://valid.canardpc.com/show_oc.php?id=555012
Blood Rage after PCIe Mod - 4.8Ghz - http://valid.canardpc.com/show_oc.php?id=794165

xernan

Hi guys just ordered a BR GTI from OCUK and want to set this up with WC. I only have a Corsair HX620 PSU, I'm not sure if this is enough with my set up... Just need some help. Thank's in advance. And also I'd like to run the 920 @ 3.4-3.6GHz 24/7 and perhaps 4.0 on gaming.

Specs:
Mobo: Bloodrage GTI
CPU: Intel i7 920 D0
GPU: HD5850
Mems: G-Skill Trident 3x2Gb 1600

H2O Loop:
Swiftech Apogee XT
Thermochill PA 120.3
DDC Laing MC355 with XSPC Res Top

Pings

As for you PSU you should be cool I ran a CORSAIR 650TX with my sig rig. Welcome to OCN!

__________________

System: OverKill HTPC

xernan

You mean 850TX? sorry just noticed it, could be typo though...Thank's for the warm welcome ^^

And by the way you have any idea where I can get a 3rd party NB cooler for my Bloodrage GTI? or perhaps somebody who's not into WC can sell me theirs ^^

Raiden911

Check ebay, or post your request in the OCN Wanted section.

-> I ordered a Bloodrage from a OCN member but the process will take a couple of weeks. I don't plan on doing any watercooloing for my setup. I could sell the WC NB cooler to j00.
But still, you should post a request in the wanted section, you would prolly get it faster than from moi.

Luck.

__________________

**The Megahalems Club**

utnorris

There are three blocks that I believe will work with them since they have the right spacing for going corner to corner and should fit right ontop of the original heatsink just like the Blood Rage block. They are the Koolance CHC-122, the XSPC Delta V3 block and the Enzotech SNBW NB block with the extended mounting plate. You will probably need longer screws than the stock ones to be able to bolt it down the the original heatsink/heat pipe system, but you can probably get that at a local hardware store.

__________________
CPUID http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=484051
Check out the DO stepping - http://valid.canardpc.com/show_oc.php?id=555012
Blood Rage after PCIe Mod - 4.8Ghz - http://valid.canardpc.com/show_oc.php?id=794165

xernan

yeah been looking at the Delta V3 block for it. Just don't wanna gamble with buying a 3rd party one unless tested by somebody in here already :P

anyways one guy already PM'd me and hoping that It would ship fast since my WC parts arrive this weekend same with the Mobo. Gah! I'm too excited and to think that I haven't decided on what case to use. Shouldn't have sold my GA Aurora =/

carrion

I use 3rd party block on my bloodrage NB.
Check some photos of my rig to see.

The block is the GPU-200 from koolance.
It fits ok but I needed to get some longer screws.

__________________

xernan

woot nice thank's for the info... btw you sure that it's GPU-200? isn't that for your video card? anybody else uses a 3rd party NB ?

Oh saw it it's for both MB and GPU ^^

Autox

What wireless card do you guys use?
I have a zonet 1642 ZEW that worked fine in win7 x64 on a P45, G33 and a 780G setup, but can't it to work on a bloodrage. Doesn't even recognize it.