HOT2DR

Hi everyone,
I would like to overclock my i7 920 on P6T7 ws can anyone post some settings please. Looking to get around 3ghz on coolermaster V10 cooler.
Thanks

AMD+nVidia

Please don't make two identical posts.

http://www.overclock.net/nvidia-driv...-settings.html

__________________
Do you really think the iPhone isn't that big? Think Again

Clockadile Dundee

I would normally say to relax memory timings and clocks first (temporarily), until the cpu OC is somewhat established, but this is such a mild OC.

bclk : 143 MHz multi: 21

or

bclk: 158 multi : 19

uncore & QPI at lowest multis, but maintain a 8:9 ratio uncore:QPI. You shouldn't even have to worry about that, just set qpi to lowest multi, uncore to twice memory clock.

You can leave all the settings on auto even, for such a low OC, but I would recommend that you just plug in the default values on many of them. Even though it is a mild OC, doesn't mean you can't optimize the voltages.

Use 20 runs of LinX, with "all memory", (if you have 6 GiB 25,000 or greater problem size.) this will tell you if it is possibly stable. Instabiltiy is not especiall likely to be induced by 158 bclk, in my experience, but instability can be caused by other things; for example, the 20x cpu multi can often be unstable.

A P6T7 WS is arriving here on monday, incidentally.

Note: P6T7 throttles with 21x, aka Turbo. This is only bad if you are a bencher really, and I hope they make it optional in a BIOS revision.

I may have forgotten something. Just read some 920 FAQs in the Intel CPU section, they make it easy, search.

HOT2DR

Thanks
So far so good might try go little bit higher later on for now runs ok