mocha989

I want to set all my voltages in the bios from auto to a set value whats a good set value for all the voltage options for the evga classfied at stock clocks? im at 1.14v on the CPu and 1.65 on the memory.

__________________

Water cooling and Cooler Master Storm Sniper Black Edition Coming Soon."

88EVGAFTW

I believe the IOH should be at 1.10 V, ICH at 1.506 (dont quote me on that, might be 1.106) Vtt on +0Mv if that is how it let's you adjust Voltages.

Does the Classified just give a list of voltages gradually increasing? or give options like +10Mv, +20Mv, or +100Mv, +200Mv

__________________

My Computer

mocha989

for the VTT +10v but then Vcore it like 1.000 1.05 1.08 1.100 1.12 and so on.

__________________

Water cooling and Cooler Master Storm Sniper Black Edition Coming Soon."

88EVGAFTW

Set Vcore to Auto and see what it says in the hardware Monitor, that should be default Vcore I believe. or Check Core temp and real temp.

__________________

My Computer

mocha989

im fine at vcore i know what to do for that.

__________________

Water cooling and Cooler Master Storm Sniper Black Edition Coming Soon."

mocha989

are these the right settings or can i lower like the CPU PPL and the IOH stuff?


CPU Vcore: 1.156v (not sure if its stable since this is below the default voltage)
CPU VTT: +200mV
CPU PLL Vcore: 1.725
IOH PLL vcore 1.65v
QPI PLL Vcore 1.100v
DIMM Voltage: 1.65v
IOH Vcore 1.10
IOH/ICH/ I/O Voltage 1.5v
ICH Vcore 1.050v

And what should my QPI Frequency Selection be? 4.8 GT/s?

__________________

Water cooling and Cooler Master Storm Sniper Black Edition Coming Soon."