|
![]() |
Overclock.net - Overclocking.net > Overclock Marketplace > For Sale / Wanted > For Sale > Legacy Sales | |
Cleanout Sale: Audio, hardware, electronics, VapoChill, MISC items
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#11 (permalink) | ||||||||||||
|
unable 2 fold effectively
![]() |
To me: i don't think so. i know it works atleast some what (but i don't know about completely) because i can control the fan speed and it does seem to change, but it's far too complicated (atleast for me) to push through a bunch of buttons to get to the fan speed, in order to change it. I also don't have any of the accessories that come with it: cables etc. which is why it is $5 bucks. if you still want it i'll give it to you for $5 shipped, but i was planning on giving it away (because of item condition, so someone could play with it atleast) if someone wanted it and they bought another item.
__________________
(1) good value coolers: XIGMATEK HDT-S1283 or Black Knight |OCZ Vendetta 2. (2) 8 PIN power connector on MOBO = 2x 4 pin connectors in parallel to lower resistence/voltage drop. 1x 4 pin will work (3) x64 OS showing only 3.x GB enable memory remapping (4) Fridge cannot cool the heat output from a PC. (5) SLI/CF is not always better than a single card. (6) CTRL + F11 will start up the dell recovery console
|
||||||||||||
|
|
|
#12 (permalink) | ||||||||||||
|
unable 2 fold effectively
![]() |
more pictures of the vapochill unit as requested by several.
ambient temp was about 27 C and unit head was cooler than -5.7 C. it had to be since the meter was reading -5.7 and i taped the plastic meter probe to the block. anyways pictures ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
(1) good value coolers: XIGMATEK HDT-S1283 or Black Knight |OCZ Vendetta 2. (2) 8 PIN power connector on MOBO = 2x 4 pin connectors in parallel to lower resistence/voltage drop. 1x 4 pin will work (3) x64 OS showing only 3.x GB enable memory remapping (4) Fridge cannot cool the heat output from a PC. (5) SLI/CF is not always better than a single card. (6) CTRL + F11 will start up the dell recovery console
Last edited by this n00b again : 07-07-08 at 11:06 PM |
||||||||||||
|
|
|
#13 (permalink) | ||||||||||||
|
Programmer
![]() |
PM sent about fan controller
__________________
|
||||||||||||
|
|
|
|
#14 (permalink) | ||||||||||||
|
Folding Fanatic
![]() |
if I picked up the sub and 6.5" speakers with the intention of hooking them up to a computer, what kind of AMP do you think I would need? I'm currently looking for a 3.5mm speaker/headphone to speaker-wire (not sure the formal name) adapter, no luck so far though.
__________________
|
||||||||||||
|
|
|
|
#15 (permalink) | |||||||||||||
|
unable 2 fold effectively
![]() |
Quote:
you need to pick up an amp. i used the SONY head unit to actually power the speakers. but i also used a Home Theatre Receiver. You can also use a stereo boom box set, but those already come with speakers (may be a choice for you if those stock speakers are REALLY the sux)
__________________
(1) good value coolers: XIGMATEK HDT-S1283 or Black Knight |OCZ Vendetta 2. (2) 8 PIN power connector on MOBO = 2x 4 pin connectors in parallel to lower resistence/voltage drop. 1x 4 pin will work (3) x64 OS showing only 3.x GB enable memory remapping (4) Fridge cannot cool the heat output from a PC. (5) SLI/CF is not always better than a single card. (6) CTRL + F11 will start up the dell recovery console
|
|||||||||||||
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|