Universal 62mm TEC Plates - Page 3 - Overclock.net

DJRenegade · 07-25-09

Hey how would i go about stopping condensation with these - i have a sunbeam CPU air cooler but interested in TEC cooling, sorry if i sound noobish but i am :P

Ultrasonic2 (muffy) · 07-26-09

Quote:

Originally Posted by DJRenegade

Hey how would i go about stopping condensation with these - i have a sunbeam CPU air cooler but interested in TEC cooling, sorry if i sound noobish but i am :P

This is the official way to insulate your motherboard

However i don't do it like that .. i dont use any lotions or positions ..I just use neoprene with compression.

phatman81 · 07-28-09

I'd be interested to use this with a coolermaster V10 (since it also uses TEC for cooling). The only problem i'd forsee is that it would no longer fit in my case with the sidepanel... it almost touches it already... computer is due to be ripped apart and clean/dusted, so if anyone has any ideas for putting it back together, i'd be willing to try one of these in a heartbeat!

qaz393 · 07-30-09

Quote:

Originally Posted by Ultrasonic2 (muffy)

[B][COLOR=Red]
Ok well if you want to DIRECT DIE TEC cool you'll need to use the most powerful TECs you can get. These TEC's are all 62mmX62mm. But NO water or air cooling blocks have at lest a 62mmX62mm perfectly flat base so you can't use 62x62mm TECs. So you need a hot and cold plate (what im selling)

i have waterblocks that are that dimension. the older swiftech 6000 series are just 63mm squared

phatman81 · 08-02-09

Anyone know offhand if this would fit under a ZALMAN CNPS 9700 NT. I have an extra rig just sitting around and figure i might as well have some fun with it...

kh90123 · 08-03-09

hey how do you fit this block onto a TRUE 120?it looks kinda thick,so can I still use the mounting screws that came with it?how do i order i and how should i pay?u accept paypal?

another question...is it really not good to just put the tec plate on direct contact with the cpu?what about those smaller 40mm tec?

Ultrasonic2 (muffy) · 08-03-09

Quote:

Originally Posted by phatman81

Anyone know offhand if this would fit under a ZALMAN CNPS 9700 NT. I have an extra rig just sitting around and figure i might as well have some fun with it...

Do you have a pic of it's mounting hardware ?

phatman81 · 08-03-09

i have the next 2 nights off from work, so ill get one for ya ASAP! (work at night, so it wont be for quite a few hours)

Ultrasonic2 (muffy) · 08-03-09

Quote:

Originally Posted by kh90123

hey how do you fit this block onto a TRUE 120?
You put the true ontop of the TEC's hot plate

it looks kinda thick,so can I still use the mounting screws that came with it?
NO i'll give you some 50mm (2inch) 3mm screws you can use

how do i order i and how should i pay?u accept paypal?
I accept Paypal PM me if you want to go a head and i'll make you up a set

another question...is it really not good to just put the tec plate on direct
contact with the cpu?
It's a very bad like i said in the add dont even think about it

what about those smaller 40mm tec?
You'll get better results with a more powerful TEC than a 40mm one.. You can of course give it a go

I hope that helps