Overclock.net › mironccr345 › SliFolder
  • 1683 views

SliFolder

Rig type Folding Rig
Description This is my main folding rig that folds 24/7....in my office. =D
Status I Own It
Last updated Jan 24, 2013 at 6:35 pm

Photos (20)

Next
Prev

Components

Total cost of this rig: $0.00 (USD)
Clone Rig

Comments (2)

OddGusta 3/14/13 at 9:06am
What's the fan you have in the PSU? I have the same setup with 2x460s and it gets really loud.
Does this void any warranties?

Thanks
mironccr345 3/27/13 at 6:54pm
Hey bud, sorry for the late reply. It would be nice to get notifications when other members post in here. I'm using a 140 NZXT fan that I took off one my Lexa S case. The PSU is great as far as price and it being fully modular. The only down side is the damn fan. If I recall, the fan spins at 28k RPM. It's suppose to be PWM or something like that, but it sounds like it's spinning at full tilt all the time. The mod is super easy, and if you're careful, you can keep your warranty. Use a hair dryer when removing the sticker. You can easily place it back once you've done the mod. Keep the old fan just in case you have any issues with the PSU. You'll have to cut the stock and replacement fan wire connecter's off and splice them together. That's pretty much it. I've been running the PSU since last APR/MAY with all my components at 100%, and that thing rocks. Send me a PM if you have any other questions.
Overclock.net › mironccr345 › SliFolder