afzsom

Would penciling in work for the vDIMM mod? Doesn't look like it. Also, any way to measure the vDIMM actual besides a multimeter (don't have one handy). Sorry for digging this one up from the depths...

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

itslogz

Worked great for me using a #2 pencil on the resistor to the top right of the CPU socket.

Got my voltages to 1.344 under orthos load, when 1.350 was set in bios. INCREDIBLY HELPFUL MOD.

-=R00bin=-

If I did the vdroop mod with a 2B pencil on my p5b deluxe, would there be any undesired effects? It seems almost too good to be true.

itslogz

SHouldnt be any undesirable effects, i did it, and quickly seen the difference and thought it was to good to be true to. but it wasnt!

try it, just make sure your shading the right resistor.

-=R00bin=-

Alright I did vdroop the mod...But now my cpu voltage is HIGHER then the BIOS settings?? Uh...whats going on...

BIOS: 1.425
Idle 1.424
Load: 1.432

I know the purpose of the vdroop mod is to get more volts under load...but more then what is set in the BIOS??

I'm so confused....

afzsom

Yea, I set mine to 1.425v as well, and under idle its 1.416v, and under load its 1.424v. Its just trial and error. Q-Tips and rubbing alcohol to remove it, and try again

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

asusboi

I'd like to do a permanent vdroop fix on my P5B-E.

What if instead of using a 50k VR, remove the resistor and just bridge with solder? Then you got zero ohms, is that damaging in the long run?

Before 1.425@BIOS gave me 1.400@idle and 1.336@load
After HB pencil mod I get 1.416@idle and 1.424@load

afzsom

I'm getting the exact same vDroop as you at the exact vCore.

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

CL3P20

Just completed my mods for vDIMM and vMCH...here a few pics of the action...I have to email before to see if he has had any luck with the SBv or FSBv mods for the P5B-deluxe...anyone here tried them yet?

RAM benching at 2.45v+ ..coming soon
500mhz FSB...

tuning NB voltage a little for the 500mhz FSB

removable 'pot board'

..just a sexy pic

__________________

..:Q6600 Club:..

INTEL 45

e8400: 5.13ghz
e7400: 4.5ghz
Q6600: 4.44ghz
16.5k-3D '06 WR, 1x 8800GS
My photo albums

Hansebanger

Good work before

Is the vdimm measure the same for ASUS Commando?

My readout is only 1.79v but I have 2.200v in bios

ASUS PC Probe reads 2.252v for the dimms but I heard that the probe software isnt that accurat ...

EDIT: I found something like this! http://www.xtremesystems.org/forums/.../t-143761.html

I think its time for some vmods

__________________
E6600 @ 4.27 http://valid.x86-secret.com/show_oc.php?id=227068
E6850 @ 4.40 http://valid.x86-secret.com/show_oc.php?id=267982
550MHz FSB http://valid.x86-secret.com/show_oc.php?id=262465
i7 920 D0 @ 4.7 http://valid.canardpc.com/show_oc.php?id=695325