|
|
|
 |
Overclock.net - Overclocking.net > Volt Mods > General Volt Mods > Motherboard Volt Mods | |
p5n-E sli vdroop mod?
|
||
 |
|
|
LinkBack | Thread Tools |
06-07-07
|
#11 (permalink) | |||||||||
|
*cough* Stock *cough*
 
|
First, I think he meant 0.05V ... not 0.5V ... thats not even possible is it? You'd have to set bios to max just to pull 1.3v lol. I get a 0.1V drop at times, but ussually about 0.07v
__________________
Quote:
DICE Expenditures: $265, Full Copper Pot=160$,Two Pentium 4 550s=45$,Pentium 4 641=35$,Celeron=25$
|
|||||||||
|
|
|
06-09-07
|
#12 (permalink) | ||||||||||||||
|
ACVW
 
|
I get about .025 drop. 1.325v BIOS, 1.312v CPU-Z (jumps to 1.283v under load), and with my multimeter, it reads 1.295 off the vCore when under load. (1.302v when idle).
I've been looking everywhere from one, and I can't find one.  At higher voltages, I'll drop a whole .1 (1.5v -> 1.489v). It sucks.
__________________
 GO REDSKINS. Cars drain my PC fund. Upgrade Fund (IE, coin jar): $3.18 USD Quote:
|
||||||||||||||
|
|
|
11-11-07
|
#13 (permalink) | |||||||||||
|
4.0ghz
 
|
You're so lucky D: I drop from 1.5v to 1.42v and from 1.162v to just a little higher than 1v.
__________________Is there really no vdroop mod for this..? My E6420 seems to be able to do 3.6GHz (it's pretty stable... but Orthos fails in less than a second. Probably because the vdroop spikes.) ..and I want to buy a cooler so that I can run it there but I won't be able to do it with the huge vdroop of doom :/ If I set the voltage too high, it'll be bad for the CPU when idle. If I set it too low, I won't be able to do anything that loads it.
|
|||||||||||
|
|
|
|
11-11-07
|
#14 (permalink) | ||||||||||||
|
Overclocker in Training
 
|
i have a p5n-e sli. im at 1.5v and under load it drops to 1.46
__________________
 When in doubt, Whip it Out!!Finished ![Project Matsuflex] http://www.overclock.net/case-mod-wo...build-log.html 3D Mark Vantage-24787 GTX 295 @ 685/1477/1250
|
||||||||||||
|
|
|
|
11-12-07
|
#15 (permalink) | |||||||||||
|
4.0ghz
|
<-- Depressed. Halp!
__________________
|
|||||||||||
|
|
|
|
12-03-07
|
#16 (permalink) | |||||||||||||
|
Overclocker in Training
|
Any one out there find a Vdroop mod for this board yet? I am looking and looking.
|
|||||||||||||
|
|
|
|
12-03-07
|
#17 (permalink) | |||||||||||||
|
Overclocker in Training
|
Is the Vdroop mod for the 680i EVGA (picture here-- vmodseVGA) boards the same as for the ASUS 650i boards?
|
|||||||||||||
|
|
|
|
12-12-07
|
#18 (permalink) | |||||||||||||
|
Overclocker in Training
|
This bump is for everyone still looking for the answer.
|
|||||||||||||
|
|
|
|
12-12-07
|
#19 (permalink) | |||||||||
|
*cough* Stock *cough*
|
I have the picture with the mod ... one sec I'll try to find it
Edit: Here yea go http://img145.imageshack.us/img145/1...1848617xs1.jpg or http://resources.vr-zone.com/Shamino/asus650/26.jpg http://www.vr-zone.com/?i=4450&s=12
__________________
Quote:
DICE Expenditures: $265, Full Copper Pot=160$,Two Pentium 4 550s=45$,Pentium 4 641=35$,Celeron=25$
Last edited by pheoxs : 12-12-07 at 10:48 PM |
|||||||||
|
|
|
|
04-16-09
|
#20 (permalink) | |||||||||||||
|
Intel Overclocker
|
i think imgona do the droop mod im droopoig a full .10
__________________
haze is lazed NOTE THESE SETTINGS ARE ALWAYS CHANGING AND IM LAZY TO UPDATE THEM.  Click Here Sign up, Make free money doing surveys and buy pc parts. i bought my e5200 with this.
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
