|
|
|
 |
Overclock.net - Overclocking.net > Volt Mods > General Volt Mods > Motherboard Volt Mods | |
Calling out all Volt Modding Experts
|
||
 |
|
|
LinkBack | Thread Tools |
07-04-07
|
#1 (permalink) | |||||||||||||
|
Windows Wrangler
 
|
Calling out all Volt Modding Experts
I own a P5N32E-SLI motherboard, like countles OCN members. This kicki butt MoBo is however know to have a relatively low FSB ceiling for Quads (possibly as low as 320!), and with my Q6600 G0 chip coming some time late August ($290) I am looking for a way to remove this limit for my OC efforts... The fact is that with a 72C tCase and using only 95W, the temperature limit should be high enough to allow us to go a bit higher if we can set it, maybe up to 3.4 on air!?! Otherwise we will be stuck with a hopefull 3.2 or perhaps even lower because of the 320 x 9.
EVGA's 680i boards are on the same boat since it seems this is a 680i related issue, and recently EVGA themselves said the following: "It was found that the GTL Reference Voltage, derived from CPU VTT/FSB Voltage, on the 680i SLI Motherboard, needed a little boost for better FSB overclocks on Kentsfield Processors. About a 0.03v-0.05v boost should yield better FSB overclocks on a Kentsfield Processor. Current boards do not have this implementation, but newer boards should be tuned with a little more GTL Ref Voltage with Kentsfields." So I ask... would there be a place on the P5N32-E SLI board to pencil/solder/what-not that would allow us to feed the extra voltage needed..? ...please forgive my noobness when it comes to modding if I made any mistakes in my statements.
__________________
"There is no point in having sharp images when you have fuzzy ideas."
Jean-Luc Godard . Treo 650 @ 442MHz!!! (142% from 312MHz) ROFL!!!
|
|||||||||||||
|
|
|
07-04-07
|
#2 (permalink) | ||||||||||||
|
Solder Slinger
 
|
I will look on xtreme ..see what I can find..
__________________
e8400: 5.13ghz e7400: 4.5ghz Q6600: 4.44ghz 16.5k-3D '06 WR, 1x 8800GS My photo albums
|
||||||||||||
|
|
|
07-04-07
|
#3 (permalink) | |||||||||||||
|
Windows Wrangler
|
CL3P20 to the rescue!
Come on guys we gotta get several of you gurus working on this one
__________________
"There is no point in having sharp images when you have fuzzy ideas."
Jean-Luc Godard . Treo 650 @ 442MHz!!! (142% from 312MHz) ROFL!!!
|
|||||||||||||
|
|
|
|
07-04-07
|
#4 (permalink) | |||||||||||||
|
Freeze It
 
|
go have a look at vrzone. They are like the guru of volt modding. Most people from XS get theres from there or learned how from there site.
voltage mod section
__________________
E6400@3856E4300@4158E6600@4510,Opti148@3102,opti170@2918,Xeon3220(B3)@3430(490fsb) UD3P@8400600FSB
|
|||||||||||||
|
|
|
|
07-04-07
|
#5 (permalink) | ||||||||||||||
|
Windows Wrangler
|
Quote:
http://forums.vr-zone.com/showthread...24#post3922224 I re-posted there, I will then CV results back over here... thanks MadMax... rep+,I bet I can get quite a bit of info about this over there, and then share it with the P5N32-E SLI guys back over here
__________________
"There is no point in having sharp images when you have fuzzy ideas."
Jean-Luc Godard . Treo 650 @ 442MHz!!! (142% from 312MHz) ROFL!!!
Last edited by USlatin : 07-04-07 at 05:10 PM |
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
