MADMAX22

Hey johny over at XS figured out this vdroop mod for the ip35 pro. I have not tested it yet (not sure if I will) but just wanted to let you all know its finally out. To all 3 or 4 guys here using this board anyways

Post 802 I believe Link

__________________
E6400@3856E4300@4158E6600@4510,Opti148@3102,opti170@2918,Xeon3220(B3)@3430(490fsb)
UD3P@8400600FSB

mahtareika

Thanks.... Thinking it will be my next board.

__________________
The Core i7 100% Stability Club

Babel

I'm too afraid to voltmod anything. Don't have the experience to do it either. One screwup and its over. Bye bye mobo/GPU.

Just a question about increasing volts on the CPU. As long as the temps are low, does it matter how much i crank up the volts? Lets say i set the volts to 1.55-1.6 or higher. Will that fry the CPU even if the temps are low?

Oh and one more thing. The VCore is on 1.4850 in the bios, but uGuru only shows 1.45-1.46 and it drops down to 1.42-1.43 when i stress the CPU.

- Babel.

__________________
If you could trace your ancestry back to the earliest reaches, you would find an exploding star in your family tree.

Scoobysnack

I got this board and Im just waiting on e6850 . Still unsure if ill do this mod though; ill probably see how it works out for other people. Nice to know one exists though, thanks!

__________________
E6850 @ 4.1ghz on air

Babel

*bump* to my question(s)

- Babel.

__________________
If you could trace your ancestry back to the earliest reaches, you would find an exploding star in your family tree.

ElGranCaCa

barely anybody has this board

Bal3Wolf

i orderd the abit ip35-e basicly same as pro but no heatpipe and less sata ports. Should be here end of next week.

__________________