|
![]() |
Overclock.net - Overclocking.net > Volt Mods > General Volt Mods > Motherboard Volt Mods | |
Boost max Dram voltage
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
New to Overclock.net
|
My 650i ultra can only do 2.1v for dram in bios, my ram needs 2.2v, is there anyway i can change this?
__________________
|
|||||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
2 + 2 = 5
![]() |
Maybe through a hardware mod or tweaked BIOS....
Have you tried them at 2.1v?
__________________
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it should work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single-Rail/Non-Modular PSUs are not always better than Multi-Rail/Modular
|
|||||||||||||
|
|
|
|
#3 (permalink) | |||||||||||
|
New to Overclock.net
|
its at 2.1v i cant run at full ram speed which is 1066mhz i need 2.2v
__________________
|
|||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||
|
2 + 2 = 5
![]() |
How fast can you get at 2.1v?
__________________
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it should work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single-Rail/Non-Modular PSUs are not always better than Multi-Rail/Modular
|
|||||||||||||
|
|
|
|
#5 (permalink) | |||||||||||
|
New to Overclock.net
|
about 900mhz if i go to much blue screen 24/7
__________________
|
|||||||||||
|
|
|
|
|
#6 (permalink) |
|
Need a New Protocol
![]() |
Check for bios update.
__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!! ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps. กกกʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ OCN's October Foldathon Prizes Thread Retro Rulez![]() This goes without saying but 1. If you can't afford to lose it don't mod or OC it. 2. At least read the OP before commenting. Semper Fi |
|
|
|
|
#7 (permalink) | |||||||||||
|
New to Overclock.net
|
p04 is the last one for the 650i ultra that i know of by evga.
__________________
|
|||||||||||
|
|
|
|
|
#8 (permalink) |
|
Need a New Protocol
![]() |
evga.
__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!! ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps. กกกʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ OCN's October Foldathon Prizes Thread Retro Rulez![]() This goes without saying but 1. If you can't afford to lose it don't mod or OC it. 2. At least read the OP before commenting. Semper Fi |
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|