Godfatherx64

hey overclockers
i have a problem, my cpu is E2180, i overclocked it to 2.8G,
first i but it on 1.3 volt then i monitored it's temp i found it 35C on idle
i wanted to decrease the temp so i reduced the volts till it reached 1.225
at every time i reduce the volts cpu-z shows it as 1.29 and still the same temp
so what should i do?
thanks

Attached Thumbnails

 

DuckieHo

You're adjusting the CPU voltage in the BIOS?

__________________
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it should work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single-Rail/Non-Modular PSUs are not always better than Multi-Rail/Modular

Acoma_Andy

Why do you want it lower then 35c? It's low already.

And I see you live in Egypt. You know that the CPU temp can't go below your room temp right?

__________________

Godfatherx64

yes Duckie, i adjust the volts from bios, the problem Acoma that in bios it it 1.225 but cpu-z shows it as 1.29
so y is that?

Smykster

35c Is a great idle temp. If anything CPUZ should show a lower volatage from vdroop. Maybe you're not saving the new voltage in your bios?

Godfatherx64

yes Duckie, i adjust the volts from bios, the problem Acoma that in bios it it 1.225 but cpu-z shows it as 1.29
so y is that?

Godfatherx64

no Smykster, i saved it in bios as 1.255 but cpuz show it as 1.29,
should i update the bios or what?