|
|
|
 |
Overclock.net - Overclocking.net > Volt Mods > General Volt Mods > Motherboard Volt Mods | |
Asus M2N E SLI CPU Voltage Problem
|
||
 |
|
|
LinkBack | Thread Tools |
08-12-09
|
#1 (permalink) | |||||||||||||
|
Overclocker
 
|
Asus M2N E SLI CPU Voltage Problem
When I attempted to overclock my AMD Athlon 64 FX-62, I went to the CPU Voltage category and noticed that it won't go higher than the stock volts, 1.350. I updated the BIOS to the newest version, 1204 but it still won't go over 1.35. Does anyone know a BIOS revision that will let me go over 1.35?, or a solution to this problem?
__________________
Core i7 920@ 4 GHz  E8400@ 4.60 GHz Opteron 185@ 3 GHz
|
|||||||||||||
|
|
|
08-12-09
|
#2 (permalink) | |||||||||||||
|
Overclocker
|
This is the best I could do using stock volts:
http://valid.canardpc.com/show_oc.php?id=650879
__________________
Core i7 920@ 4 GHz E8400@ 4.60 GHz Opteron 185@ 3 GHz
|
|||||||||||||
|
|
|
|
08-12-09
|
#3 (permalink) | |||||||||||||
|
AMD Overclocker
Join Date: Sep 2008
Location: my own little world
Posts: 309
Rep: 38
 Unique Rep: 33
Trader Rating: 0
|
The only way you might get more cpu voltage is to enable cpu voltage offset.
__________________I don't know if that will be enough to get you much higher of an oc,but it might. Your ram voltage is limited also to 1.95v.But timings are adjustable. Your best bet is to try the AI overclock of 10%,that should get you to 3080mhz, but that is about the best you can hope for. The low end m2n boards are pretty limited in ocing options. Good luck Gyro
Last edited by Gyro : 08-12-09 at 05:16 PM |
|||||||||||||
|
|
|
|
08-12-09
|
#4 (permalink) | |||||||||||||
|
Overclocker
|
Where can I find the voltage offset function? I've tried the AI overclock but it's unstable and blue screens almost instantly.
__________________
Core i7 920@ 4 GHz E8400@ 4.60 GHz Opteron 185@ 3 GHz
|
|||||||||||||
|
|
|
|
08-12-09
|
#5 (permalink) | |||||||||||||
|
AMD Overclocker
Join Date: Sep 2008
Location: my own little world
Posts: 309
Rep: 38
Unique Rep: 33
Trader Rating: 0
|
Sorry ,my mistake.
__________________Well it appears as though the m2n-e sli does not have that setting,but the m2n-e does,weird. But it would be in the advanced tab/advanced voltage control. You could check if you have that, but I looked through the manual and did not see it. You probably have to set your bios to defaults, then oc with AI. Gyro
|
|||||||||||||
|
|
|
|
08-29-09
|
#6 (permalink) | |||||||||||||
|
Overclocker
|
Bump.
__________________
Core i7 920@ 4 GHz E8400@ 4.60 GHz Opteron 185@ 3 GHz
|
|||||||||||||
|
|
|
|
08-29-09
|
#7 (permalink) | |||||||||||||
|
AMD Overclocker
Join Date: Sep 2008
Location: my own little world
Posts: 309
Rep: 38
Unique Rep: 33
Trader Rating: 0
|
__________________
|
|||||||||||||
|
|
|
|
08-31-09
|
#8 (permalink) | |||||||||||||
|
nVidia Enthusiast
|
cpu limited according to the post above
thats stupid. asus made a fail board, why open up overclocking options if you cant even increase teh power to the processor, unless the extra power might damage the board crusher, what do your temps look like?
__________________
 Nvidia BIOS flashing 101   My BIOS, help me unlock overclocking from it please!!  My BIOS thread   Looking to BUY a 939 OC'ing mobo ASAP
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
