Be there - Overclock.net

stevebaz · 06-18-08

According to the communication i got my line was meant to be activated on friday. However i got my modem today and checked dsl zone to see if it was activated and it was.

My connections is running slow atm tho, is there any tips to optimize the thomson router they give you, and does it take a while for your connection to speed up?

HatesFury · 06-18-08

Quote:

Originally Posted by stevebaz

According to the communication i got my line was meant to be activated on friday. However i got my modem today and checked dsl zone to see if it was activated and it was.

My connections is running slow atm tho, is there any tips to optimize the thomson router they give you, and does it take a while for your connection to speed up?

You very possibly need to call the ISP and provision your modem. Most modems won't work at all, or run very slow until the ISP has sent it information from their end (provisioning).

karan.t · 06-19-08

Quote:

Originally Posted by stevebaz

According to the communication i got my line was meant to be activated on friday. However i got my modem today and checked dsl zone to see if it was activated and it was.

My connections is running slow atm tho, is there any tips to optimize the thomson router they give you, and does it take a while for your connection to speed up?

DO NOT CONNECT UR ROTUER TILL THE LINE ACTIVIATION DATE!
check ur Be Account Page to see when it will be activeated

if it already is, please post ur status so we can see ur line quality
to check this go to this page
http://192.168.1.254/cgi/b/dsl/dt/?ce=1&be=0&l0=1&l1=0

need to log in with Administrator note the Capital A and leave the password blank if the settng r default.

heres a quick tip also
remove ur BT face plate and connect rotuer to Test Socket to increase quality (decrease noise)

no wiring needed just to remove 2 screws

stevebaz · 06-19-08

I rang be there and the person i spoke to said it was ok to connect as according to their system my line had been activated at the exchange.

Line Quality now using test socket

ptime: 0 days, 0:05:27
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,308 / 7,318
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.5
Line Attenuation (Up/Down) [dB]: 18.5 / 36.5
SN Margin (Up/Down) [dB]: 7.0 / 6.5
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 613
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 240 / 0

karan.t · 06-19-08

can u post ur stats again
just want to see how many errors u got
and in that post u r only 5 mins in
and it seems low

and it looks like u have Be Value

and ur noise and attenation is good
Connection Speed 19250 kbps 1347 kbps
Line Attenuation 26.0 db 14.6 db
Noise Margin 6.6 db 6.7 db

mine is that Down/Up

also how far r u from ur exchange seems pritty close

do a speed test and see wat u get too

stevebaz · 06-19-08

Quote:

Originally Posted by karan.t

can u post ur stats again
just want to see how many errors u got
and in that post u r only 5 mins in
and it seems low

and it looks like u have Be Value

and ur noise and attenation is good
Connection Speed 19250 kbps 1347 kbps
Line Attenuation 26.0 db 14.6 db
Noise Margin 6.6 db 6.7 db

mine is that Down/Up

also how far r u from ur exchange seems pritty close

do a speed test and see wat u get too

Uptime: 0 days, 2:14:33
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,304 / 7,384
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.5
Line Attenuation (Up/Down) [dB]: 18.5 / 36.5
SN Margin (Up/Down) [dB]: 7.0 / 6.0
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 33 / 63,463
CRC Errors (Up/Down): 33 / 117
HEC Errors (Up/Down): 266 / 101

I think my line is activated, the 24meg might not just be active until my activation date, which is tomorrow, so if its still like that by monday, i think ill give them a call

And im pretty close to the exchange, 1.65km (as the crow flies)

karan.t · 06-19-08

u have pritty low errors and good attentioun

i suggest u call them and ask them to put u on fast path

also accourding to this
Bandwidth (Up/Down) [kbps/kbps]: 1,304 / 7,384

it seems u been put on the Be Value

as its too low too be Unlimited or pro

i am on unlimited and i am connted at
Bandwidth (Up/Down) [kbps/kbps]: 1,347/19,250

Truambitionz · 06-19-08

Hmm, DSL sounds confusing.

karan.t · 06-19-08

its not DSL its ADSL2+

ADSL2+ and DSL are both plug and surf
but this is just to optimize it

stevebaz · 06-19-08

Quote:

Originally Posted by karan.t

u have pritty low errors and good attentioun

i suggest u call them and ask them to put u on fast path

also accourding to this
Bandwidth (Up/Down) [kbps/kbps]: 1,304 / 7,384

it seems u been put on the Be Value

as its too low too be Unlimited or pro

i am on unlimited and i am connted at
Bandwidth (Up/Down) [kbps/kbps]: 1,347/19,250

whats fast path?

As they said my activation date would be tomorrow, i think im gonna wait till after the weekend to see if the speed goes up. Then if not ill give them a call on monday.

		Overclock.net - Overclocking.net > Software, Programming and Coding > Networking & Security
Be there

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)