alij_uk

Once they stick properly they tend to stay stuck, but its up to you.

The core on the GT is pretty cool, a good deal of heat comes from the ram. I don't fancy you'll be able to get any stable o/c with the ram uncooled especially if you have no fan on the cooler.

alij_uk

Both good ideas, the thermal epoxy will pretty much never come off. I've heard it'll take the memory chip with it if you try to remove it.

Drizzt5

I plan to put a fan on later, thank you guys. Any more suggestions before i shut down and try to pwn this thing?

Drizzt5

Oh btw, i don't have any Epoxy that i know of with me I do have

Tuniq Tx-1 Thermal Compound and Artic Silver 5 Thermal Compound.

I might be able to find a bit of super glue if i look hard enough....

If i can't find or use any of this ^^ Pushing hard will be my next thing...

I am very pissed off btw that they didn't re-stick ... i should of never removed them

The reason i did remove them was cause i thought i missed some residue.

//.DK

im surprised no one has already suggested thermal tape!

http://cgi.ebay.com/4-feet-Sekisui-5...QQcmdZViewItem

i use this stuff and it seems to work real easily and cheap way to keep your on ram heat sinks but still transfer heat. Also i'd stay away from the epoxy because like some others have said already it WILL take the chip along with it if tried to taken off.

Drizzt5

Thanks for the link to the thermal tape but i Don't have any with me and i already waited like a week for this god damn cooler... i was hoping i coul dget it over with tonight

Drizzt5

I used some tx-1 and problem seems to be solved...

Thx for the helps+ If i missed a +rep on u pm me.