Mr.FraG

I think i prefer to go with an 92mm fan, but thanks for the information spacegoast +REP , any recomendation?

__________________

Mootsfox

I use a 120mm Tricool from Antec. Really, you can use any fan you want. A 92mm is a perfect fit, the 120mm doesn't look too great on it, though it works the best I think.

__________________

Important reads for all members
Forum Rules (TOS) | Piracy Policy | Keeping the forum classy

ATI Essentials Thread | Make a Projector < $100!
Ohio Overclocking Organization | State Overclocking List

Nikon D300s - Nikon D1H - Nikon D60 - Nikon F100 - 24-120mm AF - 18-55mm VR - 55-200mm VR
Nikkor 24mm AI f/2.8 - Nikkor 35mm AI f/2.8 - Nikkor 50mm AI f/2.0 - Nikkor-S 50mm f/1.4 - Nikkor 50mm AI f/1.4

jNSK

I've heard good things about the Xilence RedWing with the HR-03's. In most cases they drop temperatures by atleast 20*c and at only 19dBA with 36CFM they're a steal for the price they are.

Mr.FraG

Mootsfox have you any picture of a HR-03 with an 12cm fan? I was searching on google and i dont find it.
jNSK i don't find this fan on my country

__________________

jNSK

Oh, no idea then. You can get it in the UK, I know that much

Mootsfox

Yup!

http://www.overclock.net/ati/347665-...ml#post4100552

__________________

Important reads for all members
Forum Rules (TOS) | Piracy Policy | Keeping the forum classy

ATI Essentials Thread | Make a Projector < $100!
Ohio Overclocking Organization | State Overclocking List

Nikon D300s - Nikon D1H - Nikon D60 - Nikon F100 - 24-120mm AF - 18-55mm VR - 55-200mm VR
Nikkor 24mm AI f/2.8 - Nikkor 35mm AI f/2.8 - Nikkor 50mm AI f/2.0 - Nikkor-S 50mm f/1.4 - Nikkor 50mm AI f/1.4

Mr.FraG

Ok, i like it, i'm going to buy a scythe S-flex@ 1600 rpm. Thanks!

__________________

prosser13

Where did you get those figures from?

Xilence claim 68cfm IIRC?

__________________

spacegoast

I have a few too. you can mount the vga cooler on top or on the bottom. here is an old pic with the cooler on the bottom:


here is on with the fan on the top. the fan is not attached though and i just wanted to see how it would look and if there was even enough room for it.

there was enough room for it, but i didnt like the way it looked. so i mounted on the underside of the gpu.

__________________

Mr.FraG

Thanks for the pictures!

__________________