rpm666

Do you think a D5 or D4 pump would be able to push that oil any better? Or is the pump itself not strong enough for heavier oil?

__________________

Skullzaflare

after a few hours, are temps rising? have you devised a way to cool the oil yet?

__________________
Miata joking lists: "You Know YOU are a NA Owner when..."
ive done it lol

Hueristic

Run to the Hills, run for your lives! Nice get jarble. Love that tune!

__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!!
ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps.
¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ:
[Official]November Foldathon Retro Rulez
This goes without saying but
1. If you can't afford to lose it don't mod or OC it.
2. At least read the OP before commenting.
Semper Fi

jarble

as stronger pump like a d5 etc would help temps but for now temps are good at 43c-ish for the oil we will have to see once I a psu for the vmod's

after I put the rad and pump in temps have settled to 43ish from 65ish is a good improvement

yes they are a great band

__________________
My OIL Cooled folding garden ,The stinger club for those who want the best

OCN Speaker Club, because wasting your money on headphones, folding, and computers, just wasn't wasting it fast enough...

nategr8ns

WOAH...
Quick question: Why do you have monitors plugged in to all of the GPUs?
Great job on the rad .

__________________

jarble

at that time it was easier (and my dummy plugs were not working radio shack had mislabeled the resistors that I bought ) for now though I am running 1 gpu

__________________
My OIL Cooled folding garden ,The stinger club for those who want the best

OCN Speaker Club, because wasting your money on headphones, folding, and computers, just wasn't wasting it fast enough...

Tandem_Riders

Are you using the 'air conditioner' coil for a rad? Fans on the rad?

jarble

yes but no dedicated fan yet (enjoying the fact that this rig is completely silent) but when I get the other gpu's up Ill add a fan to help dissipate the heat

__________________
My OIL Cooled folding garden ,The stinger club for those who want the best

OCN Speaker Club, because wasting your money on headphones, folding, and computers, just wasn't wasting it fast enough...

JerseyDubbin

you could make an enclosure for the rad i think that would help too. From the pictures you have it freestanding which is great for no fans. But with fans i think a box will increase static pressure-move more air-dissipate more Heat

Nice work mate!!

__________________

Tandem_Riders

That is cool that the rad is just cooling with ambient and no forced fan/air cooling, gives you some pretty good head room I would think.

One measurement that might be cool to understand is the temp of the oil going into the rad and then the temp of the rad output. Then you can test with a fan on the rad and without.

It may be that the low flow of the pump is not so bad if the dwell time of the oil in the rad loop cools the oil further. I dunno, I am no thermal engineer.