OCN Sponsored E5200 Overclocking - Overclock.net

yomama9388 · 12-18-08

Well I received a lovely package in the mail 2 days ago. Inside was none other than an E5200

E5200: Sponsored by Overclock.net

Goals:

Code:

CPU-z:
Top 3 on hwbot.org (+5230mhz)

Super Pi (1M):
Top 3 on hwbot.org (10.97 seconds or better)

Super Pi (32M):
Top 3 on hwbot.org (10 min 52 seconds)

PiFast:
Top 3 on hwbot.org (20.98 seconds or better)

So today the overclocking starts. I've put the chip in my biostar under my Zalman 9700 for some preliminary air results. The phase comes back tomorrow so this weekend I will run it under phase and dice.

http://valid.canardpc.com/show_oc.php?id=465443

yomama9388 · 12-18-08

Reserved

**mega_option101** · 12-18-08

I hope that this chip is a golden one

Look forward to your benchmarks

yomama9388 · 12-18-08

Here is my current clock on air, still stable and under 1.45 volts, once my max overclock is found I will be finding my max fsb running 6 multiplier.

http://valid.canardpc.com/show_oc.php?id=465522

**mega_option101** · 12-18-08

Quote:

Originally Posted by yomama9388

Here is my current clock on air, still stable and under 1.45 volts, once my max overclock is found I will be finding my max fsb running 6 multiplier.

http://valid.canardpc.com/show_oc.php?id=465522

That seems about right. I did 4050mhz @ 1.47v (not really playing with the voltage just set it to that and played with the FSB)

G|F.E.A.D|Killa · 12-19-08

put that one dice. get 5.5 on it lol.

D.J.S. · 12-19-08

GL with it, is it costa rica? batch #
I have not had such great fun with e5200 , they are odd too say the least
I assume your doing this on your p45 right ??

Cant wait to see more.

**ira-k** · 12-19-08

Quote:

Originally Posted by yomama9388

Here is my current clock on air, still stable and under 1.45 volts, once my max overclock is found I will be finding my max fsb running 6 multiplier.

http://valid.canardpc.com/show_oc.php?id=465522

Nice one on a HSF..

..Good Luck, hope you bust a #1 on all the hwbot spots..

aquaburn · 12-20-08

Nice one. Have you try to low the Multiplier? To get a greater FSB.

yomama9388 · 12-20-08

Quote:

Originally Posted by aquaburn

Nice one. Have you try to low the Multiplier? To get a greater FSB.

Yes, I did some overclocking yesterday, with a 6 multiplier it seems to get stuck at around 370 fsb. Sadly I thought this might happen, these chips are known to have fsb holes around there

The compressor on the single stage has been fixed, but apparently there was water in the oil when it was being refilled, so the dryer needs to be replaced, so no phase on this chip. I'll pick up some dice tomorrow morning.

		Overclock.net - Overclocking.net > Benchmarks > Overclock.net Performance Computing Team
OCN Sponsored E5200 Overclocking

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)