Hemi

Well it's on the truck for delivery today so hopefully I can pick it up tonight.
I'm not much for writing reviews or proper documentation as I used to do that enough at work.
I'll show some loading temps with Prime95 small FFT/Blends and OCCT once this is installed.
The only changes being made will be the CPU cooler & TIM.
Attached is the existing TRUE lapped showing Prime95 small fft/blend and OCCT that I ran on monday or tuesday night.
TRUE w/OCZ Freeze is below (I'll post pics when I get home as I can't seem to remote in right now). I'll update temps for the Coolit once installed and ready to go
This should be a good comparison between a champ of an Air cooler on a new 45nm xeon quad with, form what I've read, mediocre results to outstanding results in reviews for a pre packaged water/tec cooler.
Edit: Deleted pics on desktop when I formatted last night, I'll take a few more pics now during load on those 2 programs before I go pick up the Elite from Purolator

__________________

TnB= Gir

I have money on the TRUE beating the freezone's underpowered TECs under load

__________________

What's a console?

Hemi

I'm curious myself as a member of the Coolit Staff had his QX9650 @ 4.6Ghz running prime95 small fft's hitting high 60's which is fairly impressive to me. My TRUE hit max 58C on smallfft Prme95 and settled at 53C ish which absolutely blew me away at 3.825Ghz, should have benched 4.0Ghz as I've already posted 4.1Ghz and it didn't flinch.

__________________

Mmansueto

I have the coolit on my OC'd q6600 at 3.6 1.48125 v and i get around 38 degree temps idle and around 42-46 load. But, i will agree that i think the TRUE will still beat it. i love how it looks in my cosmos case though. I should get lower temps too, as i am lapping the cpu as we speak.

alexgheseger

eenteresting... *subscribes*

__________________

Project: Slow Chemicals

Mmansueto

He also, probably had the Freezone Elite, not the standard Freezone. Alienware systems use the 2x Eliminators (also from Coolit) in the systems (one cools the CPU and one cools the dual gpu's).

EDIT Nevermind, i saw in your sig, you have the Elite coming.

Hemi

crap ya sorry, the message title should have said Freezone "Elite" sorry about that. Am I able to change it?
blonde moment nevermind !!

__________________

Perry

This should be good. I can't wait to see how it works out, good or bad.

__________________

Mmansueto

same here. i like how it works on my system, but your system is going to generate a lot more heat then mine, so i hope it performs for you, if not i am sure you can easily sell it. or that TRUE.....

Hemi

What I will keep the same..... is the TIM I'm using now the OCZ Freeze, it requires no cure time. I've read somewhere that the Elite TIM is AS5 (can't confirm that) and that took a while to properly cure last I used it and actually yielded 1 or 2C higher temps at idle with the current setup than this OCZ. Anyhow this isn't a tim discussion, just informing that it'll be as close to exactly the same as it is setup now for the comparison.

__________________