Do you think this will work? Freezone to rad - Overclock.net

lauboi · 06-02-08

im trying to mod a freezone with a rad is that possible? or would the stock pump be too weak? thanks in advance , dave

Ultrasonic2 (muffy) · 06-02-08

huh .. so you want to ad a radiator in line ? or watercool the hot side of the tec's ?

if your trying to put a copper radiator in line with the aluminium everything else ( im told its made of aluminium) you might as well save time and through yours system in the bin now ..

ChielScape · 06-02-08

this will work, but only if your unit fails in dropping temps below ambient.
if water colder than ambient temps goes trough your rad it will only heat up more.

lauboi · 06-02-08

thanks but would it help with load temps ?

ChielScape · 06-02-08

probably.

Ultrasonic2 (muffy) · 06-02-08

if the water goes above ambient at full load then it will help .. but then whats the point of the TEC chiller you might as well bin it and buy straight watercooling .. you could get a second TEC chiller and plum them together

ChielScape · 06-02-08

Quote:

Originally Posted by Ultrasonic2 (muffy)

if the water goes above ambient at full load then it will help .. but then whats the point of the TEC chiller you might as well bin it and buy straight watercooling .. you could get a second TEC chiller and plum them together

thats honestly what i would do.
if i spend a crapload of cash on one, i could do it again.

lauboi · 06-02-08

great advice as i bought my freezone for 120 shipped and an elminiator coming my way for 65 dollars shipped + reps

lauboi · 06-02-08

would i need to inslulate the water block? what type of coolant should i use? thanks

Ultrasonic2 (muffy) · 06-03-08

i assume it wont go below 0 so id use HydrX Coolant
dosent the controller try to keep it at some temp ?

06-02-08	#2 (permalink)
Ultrasonic2 (muffy) Extreme Cooler Join Date: Jun 2007 Location: Auckland New Zealand Posts: 749 Rep: 45 Unique Rep: 0 Trader Rating: 0	huh .. so you want to ad a radiator in line ? or watercool the hot side of the tec's ? if your trying to put a copper radiator in line with the aluminium everything else ( im told its made of aluminium) you might as well save time and through yours system in the bin now .. __________________ Watercooling System Radiators: 3x 240SGTS radiators in parallel to each other. Fans: 6x Scythe ULTRA KAZE 120 x 38 mm fans sucking though a 7cm shroud Pumps: 2x MCP655 pumps in series RES: 80x400mm Water Blocks:D-tek FuZion CPU (stock), Swiftech MCW60 GPU Controller: M-Cubed T-balancer BigNG adjusts fan speeds and pump speeds to keep my system at X temp CPU: INTEL 6600 GO GPU ATI 4850 HD Six disks in RAID 0

06-02-08	#6 (permalink)
Ultrasonic2 (muffy) Extreme Cooler Join Date: Jun 2007 Location: Auckland New Zealand Posts: 749 Rep: 45 Unique Rep: 0 Trader Rating: 0	if the water goes above ambient at full load then it will help .. but then whats the point of the TEC chiller you might as well bin it and buy straight watercooling .. you could get a second TEC chiller and plum them together __________________ Watercooling System Radiators: 3x 240SGTS radiators in parallel to each other. Fans: 6x Scythe ULTRA KAZE 120 x 38 mm fans sucking though a 7cm shroud Pumps: 2x MCP655 pumps in series RES: 80x400mm Water Blocks:D-tek FuZion CPU (stock), Swiftech MCW60 GPU Controller: M-Cubed T-balancer BigNG adjusts fan speeds and pump speeds to keep my system at X temp CPU: INTEL 6600 GO GPU ATI 4850 HD Six disks in RAID 0

06-03-08	#10 (permalink)
Ultrasonic2 (muffy) Extreme Cooler Join Date: Jun 2007 Location: Auckland New Zealand Posts: 749 Rep: 45 Unique Rep: 0 Trader Rating: 0	i assume it wont go below 0 so id use HydrX Coolant dosent the controller try to keep it at some temp ? __________________ Watercooling System Radiators: 3x 240SGTS radiators in parallel to each other. Fans: 6x Scythe ULTRA KAZE 120 x 38 mm fans sucking though a 7cm shroud Pumps: 2x MCP655 pumps in series RES: 80x400mm Water Blocks:D-tek FuZion CPU (stock), Swiftech MCW60 GPU Controller: M-Cubed T-balancer BigNG adjusts fan speeds and pump speeds to keep my system at X temp CPU: INTEL 6600 GO GPU ATI 4850 HD Six disks in RAID 0

		Overclock.net - Overclocking.net > Cooling > Peltiers / TEC
Do you think this will work? Freezone to rad

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)