|
![]() |
Overclock.net - Overclocking.net > Cooling > Peltiers / TEC | |
CoolIT TEC Club (unofficial)
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#21 (permalink) | ||||||||||||
|
AMD Overclocker
![]() |
Hey add me already
__________________
Do not shop at overclockersuk ![]() Do shop at watercoolinguk ![]() Will your CPU be a bottleneck? See HERE
|
||||||||||||
|
|
|
|
|
#22 (permalink) | ||||||||||
|
Security Sleuth
![]() |
I finally finished building my 2x Freezone Elite setup.
![]() Here are some temps on idle and load after 45 minutes and 2 hours of Prime95 SmallFFT at stock speed (~2.9 with Turbo). Load temps after 5 minutes would have been cheating (32C) .High flow is definitely a winner. I'm switching for a dual pump setup very soon. I will also move the NB/SB and MOSFETs to my GPU loop as they hurt my CPU temps. I also got a roll of Norprene to insulate my res and chiller blocks. I used 1/4" ID 3/8" OD Norprene tubing, using the clear PVC tubing only for the span between the pump and res to see if it was filled or not. I used a D5 Vario cranked to the max. In the screenshot: SYSTIN = NB TMPIN1 = HD temp TMPIN2 = Ambient temp TMPIN3 = Water temp (GPU) Much better already than a single FZE. It would have been simpler and cheaper to buy 2x Boreas in the first place (2x400$CDN). Idle temps are impressive but load temps could still be better. More mods to do. ![]() TiGa
Last edited by TiGa : 05-19-09 at 08:22 PM |
||||||||||
|
|
|
|
|
#23 (permalink) | |||||||||||||
|
AMD Overclocker
|
Nice!!
But which D5 pump did you use?
__________________
CoolIT TEC Club PII 940BE Stepping: CACVC AC 0851 APMW @ 4140MHz Add your Phenom 2 cpu-z validation HERE System: Sulaco PICS 9850 OC @: 3.31GHz
|
|||||||||||||
|
|
|
|
|
#24 (permalink) | ||||||||||
|
Security Sleuth
![]() |
I used a D5 Vario cranked up to 5, the regular D5 is set to 4 so the Vario is a better choice anyway. The MCP355 has more head though.
Even at full load, the coolant temperature is sub-ambient so I won't be adding any rad to my setup. Maybe another FZE or Boreas if I find a cheap used one but there still are a few degrees left to take off those load temps. The nicest thing is that two units make less noise than one on idle if the coolant temp is set to match ambient. TiGa
|
||||||||||
|
|
|
|
|
#25 (permalink) | |||||||||||||
|
cats, ugh :p
![]() |
ive got a freezone elite in the mail does that count
__________________
Quote:
Windows 7║Fan Club The HAF 932 Case Owners Club [/center] Aumotocnic"An unfortunate member of the overclock.net insomnia club"The Unofficial MSI 790FX-GD70 Owners
club
|
|||||||||||||
|
|
|
|
#26 (permalink) | ||||||||||
|
Security Sleuth
![]() |
Sure! Welcome to the club!
![]() You made the right choice getting a Freezone Elite. Even if you keep it stock, they work great. TiGa
|
||||||||||
|
|
|
|
|
#27 (permalink) | |||||||||||||
|
cats, ugh :p
![]() |
right arm
__________________
Quote:
Windows 7║Fan Club The HAF 932 Case Owners Club [/center] Aumotocnic"An unfortunate member of the overclock.net insomnia club"The Unofficial MSI 790FX-GD70 Owners
club
|
|||||||||||||
|
|
|
|
#28 (permalink) | |||||||||||||
|
AMD Overclocker
|
Hmmm...you have the Laing D5-MCP655?....that's quite an expensive pump, it's €84,99 here, plus I need a EK-D5 X-TOP so I can mount the G1/4 fittings for the 5/16 tubes which is like €30.-
If a Laing DDC-1Plus MCP355 will do (which is not variable), it'll save me some money
__________________
CoolIT TEC Club PII 940BE Stepping: CACVC AC 0851 APMW @ 4140MHz Add your Phenom 2 cpu-z validation HERE System: Sulaco PICS 9850 OC @: 3.31GHz
|
|||||||||||||
|
|
|
|
|
#29 (permalink) | |||||||||||||
|
cats, ugh :p
![]() |
so does anyone know if the borealis is any good
__________________
Quote:
Windows 7║Fan Club The HAF 932 Case Owners Club [/center] Aumotocnic"An unfortunate member of the overclock.net insomnia club"The Unofficial MSI 790FX-GD70 Owners
club
|
|||||||||||||
|
|
|
|
#30 (permalink) | |||||||||||||
|
AMD Overclocker
|
Boreas?...yeah, it's better than a Freezone Elite...it contains 4 x3TEC blocks.
Tiga and I have 2 FZE's, which almost counts as 1 Boreas
__________________
CoolIT TEC Club PII 940BE Stepping: CACVC AC 0851 APMW @ 4140MHz Add your Phenom 2 cpu-z validation HERE System: Sulaco PICS 9850 OC @: 3.31GHz
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
| Folken |
| Thread Tools | |
|
|