The EVOCADE strikes back!! - Overclock.net

Evocarlos · 05-30-09

hey every one im new here but i thought you might like to see my cascade

its back and its angry its been away
Case dimentions are L x 23" W x 17.5" H x 14"

1st stage
compressor: panasoinc (4ps164e) 16.4cc
Condenser: large moddified from ac unit
Danfoss tev: Tes2 00 orifice
Hx: 24 plate
danfoss in line filter and sight glass
temp range -40 to -50c
R507

2nd stage

compressor: toshiba (pg135x1cy) 13.5cc
Oil separator: AC&R s5580
high pressure cut off switch 350psi-off 250psi-on
captube 0.8mm 0.031" xxx"
High pressure gauge
2l expansion tank
spun drier/filter
duniek evap
4ft stanless braded suction line
temp range -90 to -105c
R1150
base and 1st + 2nd in place

24plate hx

the hx was clean'd and washed out with water then baked in the oven @200c for 40mins mmm tasty

twins

1st stage built and under vac right now

silly stupid extrnal txv with the extra pipe is a pita

its alive

1st tests of the 1st stage are good

the lagging was fun but the spray gule looks a bit gash

and this is how it really works the hx liquifying r290
gas in at the top liquid at the bottom

: i took so many pic trying to get this shot lol but the damn censerd logo kept getting in the way lol

exspantion tanks done and fitted

the 2nd stage is under vac right now will see whats going on in the morning about 11.30 when i get up lol

well the 1st full run with the 1st and 2nd stage running
1st stage hx output

system over view (internal)

2nd stage hx output to cap tube

running pressures of the 2nd stage atm will change under load

and the money shot

:

the real money shot

on 1st tests i did 50W 100W i tryd for 160W but the heat loader exploded and knocked the power off in the batcave

i then fixed the heat loader with overbrade and silicon

i then try,d for 160w

will do some more tomorrow i think the cap tube is a bit to long by about 3-4inch's

Carl..

Deegan · 05-30-09

awesome. what chip are you going to torture now?

Evocarlos · 05-30-09

Quote:

Originally Posted by Deegan

awesome. what chip are you going to torture now?

hey well i have a few lined up
q8200,q9400,q6600,q9550,e8600and some p4's
i did have golds on hwbot for my e4400 but some git took them so im gona try and get the golds back

Deegan · 05-30-09

well then you will be having some fun. thats a nice stash of cpu's. cant wait to see results.

nemesi5 · 06-01-09

do a suicide run on the e8600's , I want to see what happens

Evocarlos · 06-02-09

Quote:

Originally Posted by nemesi5

do a suicide run on the e8600's , I want to see what happens

to late i did that on the last rendtion of evocade @ -94 e8600 6.1ghz 2.002v

with a commando

hoping to get more from this chip now evocade is colder

Starbuck5000 · 06-02-09

WOOOOO GO EVO.

Someone's had a clean up, where are all the Stella cans?

d3str0y3r0fn00bs · 06-02-09

nice aircon mod, one of the first cascade ones i have ever seen. usuraly people mod them into auto cascades.

eclipseaudio4 · 06-06-09

Very cool or would that be cold! lol

Evocarlos · 06-06-09

ITS BACK!!! and loving it
ive done thumbs as i want to keep the hi rez

installing a os is always best @ -116c

ice what ice

i7 under load not sure on the speed .. it r fast

mmmmmmmmmm FROST

ice what ice

05-30-09	#1 (permalink)
Evocarlos New to Overclock.net Join Date: May 2009 Posts: 16 Rep: 2 Unique Rep: 2 Trader Rating: 0	The EVOCADE strikes back!! hey every one im new here but i thought you might like to see my cascade its back and its angry its been away Case dimentions are L x 23" W x 17.5" H x 14" 1st stage compressor: panasoinc (4ps164e) 16.4cc Condenser: large moddified from ac unit Danfoss tev: Tes2 00 orifice Hx: 24 plate danfoss in line filter and sight glass temp range -40 to -50c R507 2nd stage compressor: toshiba (pg135x1cy) 13.5cc Oil separator: AC&R s5580 high pressure cut off switch 350psi-off 250psi-on captube 0.8mm 0.031" xxx" High pressure gauge 2l expansion tank spun drier/filter duniek evap 4ft stanless braded suction line temp range -90 to -105c R1150 base and 1st + 2nd in place 24plate hx the hx was clean'd and washed out with water then baked in the oven @200c for 40mins mmm tasty twins 1st stage built and under vac right now silly stupid extrnal txv with the extra pipe is a pita its alive 1st tests of the 1st stage are good the lagging was fun but the spray gule looks a bit gash and this is how it really works the hx liquifying r290 gas in at the top liquid at the bottom : i took so many pic trying to get this shot lol but the damn censerd logo kept getting in the way lol exspantion tanks done and fitted the 2nd stage is under vac right now will see whats going on in the morning about 11.30 when i get up lol well the 1st full run with the 1st and 2nd stage running 1st stage hx output system over view (internal) 2nd stage hx output to cap tube running pressures of the 2nd stage atm will change under load and the money shot : the real money shot on 1st tests i did 50W 100W i tryd for 160W but the heat loader exploded and knocked the power off in the batcave i then fixed the heat loader with overbrade and silicon i then try,d for 160w will do some more tomorrow i think the cap tube is a bit to long by about 3-4inch's Carl..

		Overclock.net - Overclocking.net > Cooling > Phase Change
The EVOCADE strikes back!!

06-06-09	#10 (permalink)
Evocarlos New to Overclock.net Join Date: May 2009 Posts: 16 Rep: 2 Unique Rep: 2 Trader Rating: 0	ITS BACK!!! and loving it ive done thumbs as i want to keep the hi rez installing a os is always best @ -116c ice what ice i7 under load not sure on the speed .. it r fast mmmmmmmmmm FROST ice what ice

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)