|
![]() |
Overclock.net - Overclocking.net > Components > Power Supplies | |
antec true power trio 650 w
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
Overclocker in Training
|
will this psu run 2 8800 GTX's below is what it is powering now
1 - dvdrom 2 - hdd's 3 - 80 mm fans 1 - 3.5 floppy it has 2 or 3 (maybe 4)wires not in use i have the 2 6 pin wires on my gtx now and 1 sata wire on a hdd 1 4 pin on 1 hdd and the floppy and the dvdrom
|
||||||||||||
|
|
|
|
#2 (permalink) | ||||||||||||
|
ATI Enthusiast
|
im sure it would but you might want something like an 850watt.
There are lots of members on here who will be able to tell you what you need.
|
||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Overclocker in Training
|
yea im waiting for a few of them so i know if i need a new one or not
|
||||||||||||
|
|
|
|
#4 (permalink) | |||
|
Performance...
|
Antec True Power Trio TP3-650? One GTX is 176w so 2x is 352W. Antec 650W has 480W on the 12v rails so you should be fine unless you have a hungry OC cpu.
__________________
Push the limit one more time ... ![]()
|
|||
|
|
|
|
#5 (permalink) | ||||||||||||
|
Overclocker in Training
|
yes it is the TP3-650
|
||||||||||||
|
|
|
|
#6 (permalink) | ||||||||||||
|
unable 2 fold effectively
|
well to answer your question it will run the two cards.
but with a high OC drawing more power from the PSU, it will be pushing the PSU to work hard. So if i were you i'd look into a higher power PSU, but that's just me, but then again, will it work? most likely yes.
__________________
1) A good cpu cooler not too many people know about -> XIGMATEK HDT-S1283 | AKA OCZ Vendetta 2 2) The 8 PIN power connector on the MOBO is 2x 4pin power connectors combined in parallel to draw more power safely. 1x 4pin power plug will work, but you should think of an upgrade. 3) If you're running x64 OS and have more than 3GB ram installed but windows is only reporting around 3GB, Go into your bios and enable Memory remapping.
|
||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|