envision1

I'm looking at the http://www.newegg.com/Product/Produc...82E16817341018 PSU. My question is can I buy different cables to plug into the PSU. For example it comes with 6x sata connections but in the future I may want more. I know I can get the converter things but I also want to know If I can buy a different cable set to plug into the psu.

DuckieHo

You generally would need to contact OCZ for more cables as they are semi-properitary. You could make your won but will be a lot of work.

__________________
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it should work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single-Rail/Non-Modular PSUs are not always better than Multi-Rail/Modular

Tator Tot

You could possible buy used cables, but not buy extra cables.

You could take your existing cables and turn them into SATA cables.

__________________
Check Out My Sammich!Aumotocnic"An unfortunate member of the overclock.net insomnia club"
Missouri Overclockers
The ß₤ứə Çřёώ
The Red Tide ATi Owners Unite
nVidia's Gr33N Machine

mav2000

OCZ does not give extra cables.....or cable extensions.

envision1

hhm I guess some Y cables would be my best bet then.

scottsee

It's about as hard to make cables from your non-used modular cables as it is to undervolt a couple fans.

The outgoing molex connector from the powersupply is meaningless, just use one of the PCI-e, 6 or 8pin conversion cable that comes with the video card, pop off the molex PCI-e from the conversion cable and stick the molex pins from the PSU cable in the right ports and call it good. 10 min job, if that.

Just make sure you are using a 1 PCI-e connector per modular cable, with nothing else.

__________________
ATX PSU design standerds (V2.2) recomend psu fans orentation is to draw intake air from the case as an exhaust.