Overclock.net banner

Corsair HX520 Professional Series 520W ATX 2.2

583 views 1 reply 2 participants last post by  Overclock Reviews 
#1 ·
Corsair HX520 Professional Series 520W ATX 2.2

Description:
Enhanced Flexible Modular Cable Design allows you to use only those cables needed & saves you space inside your case

80 Plus Certified for 80%+ Energy Efficiency at 20%, 50% and 100% Load Condition for less Heat Generation and Lower Energy Bill

Advanced circuitry design that automatically enables power sharing between the triple +12V rails in an event of overload on any single +12V rail

Over Current / Voltage / Power Protection, Under Voltage and Short Circuit Protection provides Maximum Safety for your critical system components

120mm Fan • active PFC • modular cables • 1x 20/24-pin, 1x 4/8-pin ATX12V, 2x 6/8-pin PCIe, 4x SATA, 10x IDE, 2x Floppy, 2x 4-Pin Lüfter • + 3.3V: 24A • + 5V: 24A • +12V1: 18A • +12V2: 18A • +12V3: 18A • +5Vsb: 3A/15W • -12V: 0.8A/9.6W

99% Active Power Factor Correction provides clean and reliable power to your system
 

Attachments

See less See more
1
#2 ·
Excellent

review by wierdo124

Hasn't had a terribly easy life either. On my setup it's pushing 2 HDDs, an optical drive, enough fans to fill my CM690, an E8400, and, most significantly, a GTX 460 1GB. Best of all it doesn't even seem to push it! Cheaper 500W models would have difficulty with that. It's a Corsair, I got what I paid for.

ProsCons
Been used for close to 5 years now and hasn't had a hiccup.Cable management even with modular cables isn't great - some cables aren't needed and can't be removed

Ratings
Overall5
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top